Batters are highly complex systems with wide ranging ingredients including flours, water, flavorings, and spices. Interactions between the ingredients determine the performance of batters and the final quality of coated products. Addition of hydrocolloids into batters of different types of flour provides special effects on batter performance. The functionalities of hydrocolloids-flour mixtures in terms of the thermal and rheological properties of the resulting batter systems were investigated in this study. / The rheological properties of the batter were determined using a strain/stress control rheometer. A steady state method was used to measure the viscosity as a function of the shear rate varying from 0.5 to 150 s-1 at 15°C. The resulting data was then fitted to the Herschel-Bulkley Model. The viscoelastic properties were monitored as a function of temperature and were determined using a dynamic oscillatory test. Two different temperature profiles were used to simulate cooking and storage processes. Differential scanning calorimetry (DSC) was used to determine thermal properties (namely glass transition temperature, gelatinization temperature, ice melting temperature, and enthalpy) and to describe the phase transitions that occur during heating and cooling processes. / The rheological and thermal properties varied for different types of flours and their combination ratios, as well as different types of hydrocolloids at different concentrations. The replacement of corn flour greatly altered the viscosity and viscoelastic properties of wheat based and rice based batter systems. Using 100% corn flour based batter showed highest yield stress, whereas 100% rice flour based batter did not show any yield stress. Higher temperatures and longer times were required to gelatinize starch at the higher levels of rice flour for each batter system flour mix combination. The various combination ratios of the flours apparently did not significant influence the gelatinization temperatures of the batter systems. However they significantly influence the total enthalpies (DeltaHG) of the various samples. Wheat flour based batters showed the lowest glass transition temperatures. Thermal properties of wheat-based batters were influenced by the replacement of wheat with rice or corn flours. Corn flour based batters required considerably more energy for gelatinization during the cooking process. / Hydrocolloids lowered flow behavior index (n) and increased the consistency index (k) of all batters. The gums also changed the onset temperature of structure development and the storage and loss moduli of the batter systems. Hydrocolloids greatly influenced the thermal properties of batter systems. The gums shifted gelatinization temperature and depressed glass transition temperature of resulting batter systems. Further, MC increased the melting temperature (Tm) for the test batter systems as compared with the values for the control system without methylcellulose (MC). Carboxymethylcellulose (CMC) did not show statistically significant effects on the total enthalpies of ice melting for all samples. However, MC and CMC showed more pronounced effects on rice, corn, and their combined flour based batters than it did on wheat flour based batters. However, this characteristic does not show in batter systems containing xanthan gum.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.103018 |
| Date | January 2007 |
| Creators | Xue, Jun, 1966- |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Doctor of Philosophy (Department of Bioresource Engineering.) |
| Rights | © Jun Xue, 2007 |
| Relation | alephsysno: 002602082, proquestno: AAINR32257, Theses scanned by UMI/ProQuest. |
Page generated in 0.0022 seconds