The past decade has seen an increased interest in multiwavelength optical sources. Various methods and technologies exist for developing multiwavelength lasers with varying features and characteristics. A particular category that has gained much interest, are multiwavelength fiber lasers that combine nonlinear gain from stimulated Brillouin scattering with linear gain from erbium doped fibers. / This thesis demonstrates experimentally a Brillouin semiconductor multiwavelength fiber laser that utilizes semiconductor optical amplifiers as the linear gain medium. This novel technique allows for multiwavelength Brillouin fiber lasers to operate in any wavelength band for which SOAs are available. We begin by demonstrating a ring cavity configuration with a single wavelength output in the C/L bands. This configuration is enhanced for multiwavelength generation by the addition of a feedback path. The setup is then implemented in the O-band to demonste that the Brillouin fiber laser can be made to operate at any wavelength. Finally, several linear cavity configurations are explored and shown to improve the performance of the multiwavelength output in the O- and C/L- bands.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.116042 |
Date | January 2008 |
Creators | Hayder, Alaa. |
Publisher | McGill University |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Format | application/pdf |
Coverage | Master of Engineering (Department of Electrical and Computer Engineering.) |
Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
Relation | alephsysno: 002842121, proquestno: AAIMR66980, Theses scanned by UMI/ProQuest. |
Page generated in 0.0017 seconds