This master‘s thesis deals with strain-stress analysis of hip joint together with the final applied total endoprosthesis with Burch-Schneider cage. The main point of my work was to find the solution of stress–strain analysis state, which has been mentioned before in connection with Burch-Schneider cage. I describe the technique of geometric creation of whole body system, component´s materials or conditions which are neccessary for calculation. In coclusion there are results achieved in variants. In the first option the case of bone tissue was considered, which don’t reach degradation mechanical properties effect straining under Burch-Schneider cage. In some cases when the bone tissue is untimely forced, the necrosis of bone tissue takes place under Burch-Schneider cage. This possibility is described in the second option of type. For every option there was a case which was calculated with applied screw or without it. In all option mechanical features of cancellous bone tissue and their change influence on achieved results were considered. This problem was solved computational simulation in commercial software Ansys Workbench 12.0.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229082 |
| Date | January 2010 |
| Creators | Řehák, Kamil |
| Contributors | Fuis, Vladimír, Florian, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.003 seconds