This work characterized burn-off emissions from automobiles. After an exhaustive literature review, engine temperatures were determined to reach a maximum temperature of approximately 110oC, while exhaust system components reached a maximum temperature around 600oC. Metal-drawing fluids were used to bend the exhaust system components during manufacturing. Because these components were not rinsed prior to incorporation into a vehicle, residues could be left on the surfaces. An experimental test chamber was constructed to conduct controlled testing of three metalworking fluids of various types to mimic real-world conditions. Real-time particle number measurements were made using a condensation particle counter and an optical particle counter. The temperature at which burn-off begins to occur was found to be around 120 to 150oC. This burn-off was found to be an evaporation-condensation phenomenon when metalworking fluid residues vaporize and condense forming fine (0.1µm to 2.5µm) and ultrafine (<0.1µm) aerosols. The temperature dependency of this phenomenon was observed to follow the Clausius-Clapeyron equation that states as temperature increases, vapor pressure increases. Most aerosol particles were observed to be in the range of less than 0.01µm to approximately 2.0µm.
Identifer | oai:union.ndltd.org:uiowa.edu/oai:ir.uiowa.edu:etd-1209 |
Date | 01 January 2008 |
Creators | Scott, Krista Janette |
Contributors | Heitbrink, William A. |
Publisher | University of Iowa |
Source Sets | University of Iowa |
Language | English |
Detected Language | English |
Type | thesis |
Format | application/pdf |
Source | Theses and Dissertations |
Rights | Copyright 2008 Krista Janette Scott |
Page generated in 0.0014 seconds