The formation of burrs in Machining Operations occurs by three Basic Mechanisms:
1) Lateral Extrusion of material
2) Bending of the chip
3) Tearing of the chip form the workpiece
Each of these mechanisms has been studied analytically and compared to experimental results. The agreement between predictions and measurements has been found to be close.
Drilling, milling, grinding, and turning burrs were produced in 303Se stainless steel and their properties were related to tool geometry, feedrates, and depth of cut. One thousand measurements were made and subsequently analyzed by analysis of variance techniques. The properties measured include burr length and thickness.
Both the theory and the empirical results indicate that burrs cannot be prevented by changing machine variables. Burr size can be minimized, however, by appropriate machining conditions.
| Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-5595 |
| Date | 01 May 1973 |
| Creators | Gillespie, LaRoux K. |
| Publisher | DigitalCommons@USU |
| Source Sets | Utah State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Graduate Theses and Dissertations |
| Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0018 seconds