As the use of digital systems continues to grow, there is an increasing need to convert analog information into the digital domain. Successive Approximation Register (SAR) analog-to-digital converters are used extensively in this regard due to their high resolution, small die area, and moderate conversion speeds. However, capacitor mismatch within the SAR converter is a limiting factor in its accuracy and resolution. Without some form of calibration, a SAR converter can only reasonably achieve an accuracy of 10 bits. The Split-ADC technique is a digital, deterministic, background self-calibration algorithm that can be applied to the SAR converter. This thesis describes the circuit design and physical implementation of a novel 16-bit 1MS/s SAR analog-to-digital converter for use with the Split-ADC calibration algorithm. The system was designed using the Jazz 0.18um CMOS process, successfully operates at 1MS/s, and consumes a die area of 1.2mm2. The calibration algorithm was applied, showing an improvement in the overall accuracy of the converter.
Identifer | oai:union.ndltd.org:wpi.edu/oai:digitalcommons.wpi.edu:etd-theses-1422 |
Date | 28 April 2010 |
Creators | Brenneman, Cody R. |
Contributors | Andrew G. Klein, Committee Member, Stephen J. Bitar, Committee Member, John A. McNeill, Advisor |
Publisher | Digital WPI |
Source Sets | Worcester Polytechnic Institute |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Masters Theses (All Theses, All Years) |
Page generated in 0.0309 seconds