The thesis deals with technology of hot-rolled profiles, describing total summary of principles and conditions this process is based on. There is a draft of a calibration of profile, the application of which is subsequently verified through a numerical simulation. Futher in the thesis also was verified the mechanical properties of applied construction steel S355J2 through the up-setting test and compared the results with the used material model in the simulation software Simufact Forming. Then, the test rolling of the calibrated profile was carried out. As a next step, the dimensions of the rolled bars were compared with the results of the simulation, on the basis of which the applicability and suitability of the simulation in the future development of other profiles was verified and evaluated.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:382105 |
| Date | January 2018 |
| Creators | Sigmund, Lukáš |
| Contributors | Lidmila, Zdeněk, Řiháček, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds