Return to search

Vývoj agregátu obráběcího centra umožňující výrobu přímého a šikmého ozubení odvalovacím způsobem / Entwicklung eines Wälzsstoßaggregates zur Erzeugung von Gerad- und Schrägverzahnungen auf flexiblen Bearbeitungszentren

The diploma thesis shows design of the aggregate, which allow the machining center to shape gears with Fellows Method. The principle of this unit is to convert the rotation movement of the spindle to the translational movement while adding the rolling tool movement. At the same time, the mechanism ensures a constant cutting speed. The unit is divided into 5 sub-mechanisms. For each of the mechanisms, the most appropriate option is choose with help of analysis of usable methods. The most appropriate method is then designed and possibly calculated. The thesis describes the design of such a solution using mechanical gears and cams. This mechanism allows maximum speed at 900 rpm. at the maximum developed force of 5.5kN. The unit is primarily intended for small-scale production, as a cheaper alternative to buying a whole machine.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:393990
Date January 2019
CreatorsPavlík, Martin
ContributorsHänel, Thomas, Blecha, Petr
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.002 seconds