Return to search

Geologic Feasibility of Dam and Reservoir Sites, Blacksmith Fork Canyon, Utah

Two areas along the Blacksmith Fork River, in the Bear River Range southeast of Logan, Utah, were studied as sites for a storage dam and reservoir. An earth dam, 150-200 feet high, and a reservoir of 15,000-20,000 acre-feet are contemplated by the Bureau of Reclamation, U.S. Department of Interior. The lower area, located about 7 miles east of the mountain front, involves two possible dam sites on limestone. Thick overburden is present in the canyon bottom and on the right abutments. The upper area, located about 2 miles south of the headquarters of the Hardware Ranch, includes two possible dam sites on quartzite. The quartzite at the upstream site was found, by drilling and testing, to be extensively fractured; the downstream site has not been drilled. Acceptable topographic settings are present at both of these sites. Geological factors, as well as a difficult road relocation necessitated by the reservoir, exclude the lower area. It is recommended that the downstream site of the upper area be explored by means of a drilling program. A systematic evaluation of constructio materials near this site, based on appropriate excavations, is also required. (58 pages)

Identiferoai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-2898
Date01 May 1968
CreatorsBuenaventura, Alfredo Capistrano
PublisherDigitalCommons@USU
Source SetsUtah State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceAll Graduate Theses and Dissertations
RightsCopyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu).

Page generated in 0.0024 seconds