Return to search

Obrábění kobaltové slitiny UmCo50 / Machining of the cobalt alloy UmCo50

The diploma thesis deals with the topic of machinability of materials. The theoretical part describes the aspects according to which machinability can be evaluated. The material side of the thesis is focused on various types of difficult-to-machine materials. The cobalt alloy UmCo50 belongs to the group of difficult-to-machine materials and it is the subject of the experimental part. UmCo50 is an alloy for high temperature use. The primary aim of the thesis was to monitor the wear of the selected cutting tool when turning this alloy. Other aspects of the selected machining process were also monitored, such as force effects or the quality of the machined surface. Despite the fact that machinability of tested materials cannot be expressed in terms of the absolute value of a quantity, it is necessary to compare the various aspects of the machining processes by reference materials. However, certain conditions of this comparison must be met. Based on this, a comparison of tested and reference material was performed.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444280
Date January 2021
CreatorsPrno, Peter
ContributorsSedlák, Josef, Zemčík, Oskar
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0019 seconds