WCDMA promises to achieve high-speed internet, high quality image transmission and
high-speed data services with larger system capacity. However, Multiple Access
Interference is one of the major causes of transmission impairment, which reduces the
link capacity in WCDMA systems. The Adaptive Antenna Array (AAA) technique
reduces multiple access interference by directing antenna beam nulls towards the
interfering signals by weighting the received signals from all antennas before
combining the signals.
With the very rapid advancement of wireless personal communications services, a new
challenge to the cellular industry is the integration of multiple systems and applications
on a single device. A software radio technique offers a possible solution to achieve this
goal including international roaming and multiple standard operations within the same
geographical area. The main attraction of a software radio is it's flexibility, in that it
can be programmed for emerging cellular standards allowing it to be updated with new
software without any changes in the hardware infrastructure. A software radio
incorporating adaptive array beamforming at the receiver can increase the total carried
traffic in a system and transmit power while the probability of call blocking and forced
termination can also be decreased.
This dissertation examines WCDMA, AAA, power control and software radio
techniques in the world of wireless communication systems. Once the theoretical
background of CDMA and AAA has been substantiated, the thesis establishes the need
for power control in mobile systems by examining simulation results. An AAA receiver with six antenna elements is proposed and evaluated in different
environments as a precursor to implementation. It can be inferred that when the link is
interference limited, the link capacity can be increased and it has been shown that the
AAA receiver with six antenna elements increases the link capacity to about 2.9 times
that of the single antenna RAKE receiver.
This thesis also examines the basic concepts of VHDL and considers this as the
principle means to program reconfigurable core FPGA's in the software radio. A three-layered
(PC/DSP/FPGA) software radio test bed is used to implement an AAA
receiver. The architecture of the test bed is designed in such a way that it can be used to
evaluate the performance of various FPGA based transceivers and coding schemes etc.
Many of the desirable features and flexibilities inherent in the software radio concept
are available on this test bed and the system has proved to be capable of high speed
digital processing and is ideally suited to the development of time critical system
components. The bit error rate achieved using the implemented receiver is assessed and
compared to simulation results in an environment incorporating Rayleigh fading and
AWGN. / Thesis (M.Sc.Eng.)-University of Natal, Durban, 2001.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:ukzn/oai:http://researchspace.ukzn.ac.za:10413/8972 |
Date | January 2001 |
Creators | Kora, Saju P. |
Contributors | McDonald, Stephen A. |
Source Sets | South African National ETD Portal |
Language | en_ZA |
Detected Language | English |
Type | Thesis |
Page generated in 7.261 seconds