This thesis will setup and configure a channel sounding system, further it will set up a software environment for channel model extraction (characteristic of the channel) and evaluation. The motivation of the project is to set up and configure a channel sounding system based a Spectral Analyzer (Agilent E4407B), Signal Generator (Agilent E8267D), Signal Studio and Matlab software. The main motivation is to evaluate capability of such a channel sounding system, and see if it can be used for future channel model extraction. Channel Sounding is based on emitting RF signal from one antenna and receiving the RF signal at another antenna (spatial place), extracting the channel response. This project will start with getting familiar with the basic operation of the Spectral Analyzer (Agilent E4407B), the Signal Generator (Agilent E8267D) and Signal Studio. Then set up a channel sounding system with previous mentioned equipment. Then as practical exercise some channel sounding and channel model extraction will be conducted. Especially see what kind of parameters those are possible to extract, time delay, propagation paths etc.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hh-2203 |
| Date | January 2008 |
| Creators | Iftikhar, Wajid, Raichl, Jaroslav |
| Publisher | Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), Högskolan i Halmstad/Sektionen för Informationsvetenskap, Data- och Elektroteknik (IDE) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds