Return to search

Isomerisation of cyclopropane in a flow reactor

Three aspects of the isomerization reaction of cyclopropane to propylene were explored, in order to evaluate the suitability of this rearrangement for use as a model reaction in studying the effects of pore diffusion on the rates of chemical change in porous solids.
First, kinetic data for this reaction were extended from 555°C to 620°C, with good agreement being obtained with data of others at temperatures below 555°C For the results of this work, as well as for all other published results, the first order homogeneous rate constant at infinite pressure can be represented by log₁₀ k =15.38 [formula omitted] (T in degrees Kelvin) with an accuracy of ± 15% over the temperature range 470°- 620°C.
Second, the isomerization was shown to proceed homogeneously in the presence of Pyrex surfaces, even with 60-fold changes in-the surface to volume ratio.
Third, the only side reaction of any importance was the decomposition of propylene, which was found to be about 20-50 times slower than the cyclopropane isomerization.
These results indicate that the cyclopropane reaction is a satisfactory one for the purposes of studying diffusion controlled processes, but the propylene pyrolysis may restrict the range of desirable experimental conditions. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/38855
Date January 1962
CreatorsDavis, Brian Richard
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.002 seconds