Production wastes for which a direct use in another production is found become secondary raw materials. There are several institutions in Czech Republic and in the world, which are currently dealing with the issue. This thesis deals with the issue of cementitious spray concrete mixtures and deals with the possibilities of using secondary raw materials and waste from production as partial replacement of binder and filler in these mixtures. The aim of this theses is to optimize the composition of additives in the recipe of the commercially produced pray mixture and to verify the influence of the degree of substitution of binder or filler by secondary raw materials on its physical-mechanical properties. The aim is to maintain or increase these properties while substituting the binder and filler as much as possible. After the evaluation of results, it is possible to say, by suitable optimization of the additives it is possible to achieve a significant improvement of the physical-mechanical properties of the mass and furthermore, from the results of this thesis follows, that by substitution of 100% fine filler in combination with substitution of 30% binder it is possible to maintain or increase the physical-mechanical properties after 28 days of curing and to significantly increase these properties after 90 days of curing. The results of this thesis are also related to the reduction of economic impact on production of the spray mixture, mainly due to the use of secondary raw materials.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:392360 |
| Date | January 2019 |
| Creators | Hermann, Radek |
| Contributors | Dohnálek,, Pavel, Drochytka, Rostislav |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds