The present study developes a mixed finite element formulation for the analysis of piezoelectric circular and annular plates. This formulation combines the conventional displacement-electric potential type variational principle and the piezoelectric Reissner`s principle with a weighting factor which represents ratio of weights imposed on the above two variational principles, and which can be adjusted by comparing with experiment results. With this formulation, stresses and electric displacements, like displacements and electric potential, are primary variables and are continuous across elements and element interfaces. Also, all displacement, stress, electric displacement, and electric potential boundary conditions can be easily and exactly imposed. Static deformations and vibration frequencies of some typical piezoelectric circular and annular plates are then obtained with the present approach and are compared with those by other methods. Based on experiment results in the literature, it is found that better results could be obtained in general by the present mixed finite element formulation than the others when 1 is chosen as the weighting factor.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0212109-144816 |
| Date | 12 February 2009 |
| Creators | Chen, Ting-jung |
| Contributors | Ming-Hwa Jen, none, none, Jao-Hwa Kuang, Chorng-Fuh Liu |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0212109-144816 |
| Rights | unrestricted, Copyright information available at source archive |
Page generated in 0.0018 seconds