The focus of this dissertation is on the development and circuit modeling of planar series-fed, linear- and circular-polarized microstrip aperture-coupled antennas and N-element arrays operating in C-band. These arrays were designed to be used as part of airborne or land-based frequency-hopped communication systems. One of the main objectives of this work was to maintain a constant beam angle over the frequency band of operation. In order to achieve constant beam pointing versus frequency, an anti-symmetric series-fed approach using lumped-element circuit models was developed. This series feed architecture also balances the power radiated by each element in the N-element arrays.
The proposed series-fed approach was used in the development of four-element series-fed aperture-coupled arrays with 15% 10 dB impedance bandwidth centered at 5 GHz and a gain of 11.5 dB, to construct an omni-directional radiator. Omni-directional radiators with pattern frequency stability are desired in a multitude of applications; from defense in tactical communications, information gathering, and detection of signal of interest to being part of sensors in medical applications. A hexagonal assembly of six series-fed microstrip aperture-coupled four-element arrays was used to achieve the omni-directional radiation with 0.6 dB peak to peak difference across 360˚ broadside pattern and 0.6 dB gain variation at the specific azimuth angle across 15% impedance bandwidth. Given that each of these six arrays can be individually controlled, this configuration allows for individual pattern control and reconfiguration of the omni-directional pattern with increased gain at specific azimuth angles and the ability to form a directional pattern by employing a fewer number of arrays. Incorporating a beam-forming network or power distribution network is also possible.
Wide 3 dB circular polarization (CP) bandwidth was achieved without external couplers and via only a single feed with a unique Z-slot aperture-coupled microstrip antenna. A single RHCP Z-slot aperture-coupled antenna has ∼10% CP and 10 dB impedance bandwidth. The series-fed network consisting of lumped elements, open-circuited stubs and transmission lines was subsequently developed to maintain more than 5% CP and 10% 10 dB impedance bandwidth in the series-fed four-element Z-slot aperture-coupled CP array that could also be used for-omni-directional radiation.
| Identifer | oai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-5621 |
| Date | 01 January 2012 |
| Creators | Zivanovic, Bojana |
| Publisher | Scholar Commons |
| Source Sets | University of South Flordia |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Graduate Theses and Dissertations |
| Rights | default |
Page generated in 0.0021 seconds