The master thesis describes application of a sandwich construction for Formula Student car. It will replace the current tubular space frame according to FSAE rules. The introduction is focused on the information of international Formula Student competition, including TU Brno Racing Team. Then there are important rules for the construction of frames and composite monocoques. For the selected production technology are found strength properties of face sheets made of carbon and hybrid fibres. Another part of thesis deals with the design of the sandwich panel using analytical calculation to determine the bending stiffness. On the basis of these proposals are made three-point bending and shear tests. Using of FEM simulation is detected torsional stiffness of the tubular space frame and the monocoque concept from the proposed sandwich panels. The conclusion is devoted to a summary of the important information and possible monocoque manufacturing process.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:254214 |
| Date | January 2016 |
| Creators | Žídek, Tomáš |
| Contributors | Cejpek, Jakub, Löffelmann, František |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0082 seconds