Purpose: The purpose of this study was to investigate whether timber-concrete composite (TCC) floors made of a CLT-deck and casted concrete could be used as a method for increasing the use of wood as a building material. Method: The methods used in this degree project were a literature study, in which a number of laws of construction and different connector systems were studied, as well as an experiment consisting of bending tests on CLT-decks with casted concrete where SFS VB-screws were used as shear connectors. Results: The TCC-beams in the experiment behaved as expected and went to bending failure. The beams displayed an almost invisible slip between the materials despite the low composite action of 40,2 %. In addition, the beams had a higher bending stiffness on average than CLT-beams of the same height would have. Conclusions: Compared to floors made entirely of wood, TCC-floors with CLT add extra mass, stiffness, and better acoustic properties to the construction while maintaining a low floor height. The three main types of connectors used in TCC floors are mechanical, notched and glued-in connectors, where the latter two generates higher composite action and stiffness. Adhesive connection is another method with great potential, but there is still more research needed for this type of connection to be used.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mdh-49152 |
| Date | January 2020 |
| Creators | Nilsson, Ida, Svensson, Dennis |
| Publisher | Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0023 seconds