To further the research done in machining complex surfaces, Jensen [1993] developed an algorithm that matches the normal curvature at a point along the surface with the resultant radius formed by tilting a standard flat end mill. The algorithm called Curvature Matched Machining (CM2) is faster and more efficient than conventional three-axis machining [Jensen 1993, Simpson 1995 & Kitchen 1996]. Despite the successes of CM2 there are still many areas available for research. Consider the machining of a mold or die. The complex nature of a mold requires at least 20-30 weeks of lead time. Of those 20-30 weeks 50% is spent in machining. Of that time 50-65% is spent in rough machining. For a mold or die that amounts to 7 to 8 weeks of rough machining. If one could achieve as much as a 10-15% reduction in machining time that would amount to almost one week worth of time savings. As can be seen, small improvements in time and efficiency for rough machining can yield significant results [Fallbohmer 1996]. This research developed an algorithm that focused on reducing the overall machining time for parts and surfaces. Particularly, the focus of this research was within rough machining. The algorithm incorporated principles of three-axis rough cutting with five-axis CM2, hence Rough Curvature Matched Machining (RCM2). In doing so, the algorithm ‘morphed‘ planar machining slices to the semi-roughed surface allowing the finish pass to be complete in one pass. This roughing algorithm has significant time-savings over current roughing techniques.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-1319 |
| Date | 16 May 2005 |
| Creators | Thompson, Michael Blaine |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.0024 seconds