The introduction of cellular wireless systems in the 1980s has resulted in a huge demand for personal communication services. This demand has made larger capacity systems necessary. This has been partially satisfied by the introduction of second generation digital systems. New third generation systems are now under going standardisation and will require even more efficient utilisation of the spectrum if the high bandwidth features and larger capacity are to become a reality. Motivated by these growing requirements we discuss methods of achieving large improvements in spectral efficiency and performance. Multiple-user communications over a channel can only be achieved with some form of diversity. In this work we point out that the efficient utilisation of the dimensions of space, time, and frequency will ultimately maximise the system capacity of a multiple-user system. We apply our receiver techniques solely to the base-station design where capacity limitations are currently present. We note however, that some of these techniques could also be applied at the mobile terminal receiver. We primarily focus our attention on the direct-sequence code-division multiple-access (DS/CDMA) channel, since this channel is inherently interference limited by other users in the cell of interest. We exploit a new powerful channel coding technique named " turbo coding" for its iterative decoding approach. We show how we can substitute the inner convolutional code of a turbo code encoder with the CDMA channel. By " iterative detection/decoding" or " turbo equalisation" at the receiver we achieve performance results which show the interference from other users to approach complete removal. We develop and analyse a new, low complexity, iterative interference canceller/decoder. This receiver has complexity per user linear with the memory of the channel and independent of the number of users in the system. We extend this receiver to more realistic channels that are asynchronous and include multi-path, and include spatial diversity by using an antenna array at the receiver. The CDMA channel we study exclusively uses randomly generated spreading codes. With this channel model we still achieve single user performance (no interference from other users) with a 10logL gain from L antenna elements and a gain of up to 10logP from P multi-path components. With any new receiver design, sensitivity to channel parameter errors is of paramount interest. We find that the sensitivity of our receiver is low with respect to the parameter errors induced. This is as we desire for a realisable receiver design. Finally we investigate the application of this new iterative interference canceller/decoder receiver to a number of other interference channels. These include the intersymbol interference (ISI) channel, partial response signalling (PRS), and continuous phase modulation (CPM). For these channels excellent performance improvement is generally achieved by the utilisation of the iterative interference canceller/decoder solution. / Thesis (PhD)--University of South Australia, 1999
| Identifer | oai:union.ndltd.org:ADTP/284420 |
| Date | January 1999 |
| Creators | Reed, Mark C |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright 1999 Mark C Reed |
Page generated in 0.0017 seconds