Rock weirs are small dam-like structures composed of large loose rock commonly found in ecological engineering design. By appearing more natural than concrete structures, rock weirs are preferred for use as hydraulic control structures in river engineering, stormwater management, and constructed wetlands. Rock weirs increase hydraulic head upstream, and facilitate fish passage, channel stabilization, floodplain reconnection, and in-stream habitat creation. When used in constructed wetlands, rock weirs play a valuable role in developing appropriate wetland hydrology. Although rock weirs are commonly used, a deficit of knowledge exists relating to the stage-discharge relationship of these structures. Therefore, the goal of this research was to determine a weir equation and corresponding discharge coefficients that improve predictions of flow through rock weirs.
A flume study was conducted to develop a rock weir equation and discharge coefficients. Scaled model rock weirs were tested in a 1 m x 8 m x 0.4 m recirculating flume. Rock weirs varied by length (0.152 m, 0.305 m, and 0.457 m), depth (0.152 m and 0.305 m), and minimum rock diameter (12.7 mm, 19.1 mm, 25.4 mm). Three channel slopes were used (0%, 0.5%, 1%), and the flume discharge was varied for five water stages for each rock weir. Buckingham Pi analysis was used to develop seven dimensionless parameters. Regression analyses were then used to develop a model for discharge and the discharge coefficient. Results showed that weir length and depth play a significant role in predicting the discharge coefficient of rock weirs. / Master of Science / Rock weirs are small dam-like structures composed of large loose rock; by appearing more natural, they are preferred for use in river engineering, stormwater management, and constructed wetlands. Rock weirs increase upstream water depth, improving fish passage, channel stabilization, floodplain reconnection, and in-stream habitat creation. When used in design of constructed wetlands, rock weirs are used to establish the necessary water depths for a given type of wetland. Although rock weirs are commonly used in engineering design, there are no equations to predict water velocity or flow rate across these structures. Therefore, the goal of this research was to determine a weir equation that improves predictions of flow through rock weirs. A flume study was conducted to develop a rock weir equation. Miniature rock weirs were tested in a 1 m x 8 m x 0.4 m recirculating laboratory channel. Rock weirs varied by length (0.152 m, 0.305 m, and 0.457 m), depth (0.152 m and 0.305 m), and minimum rock diameter (12.7 mm, 19.1 mm, 25.4 mm). Three channel slopes were used (0%, 0.5%, 1%), and the water flow rate was varied for five water depths for each rock weir. Statistical analyses were conducted to determine an equation that predicts water flow through rock weirs for use in engineering design. Results showed that weir length and depth played a significant role in predicting water flow through rock weirs.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/90401 |
| Date | 21 June 2019 |
| Creators | Solis, Suraye Rori |
| Contributors | Biological Systems Engineering, Thompson, Theresa M., Czuba, Jonathan A., Daniels, W. Lee |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0018 seconds