Master’s thesis summs up issues of mounting pemanent magnets on rotor surface of permanent magnet synchronous machine. Literature reseach is divided in two parts. First one shows studies and experiments researching the impact of manufacturing tolerances of permanent magnets and wrong mounting on the rotor on cogging torque . The second part focus on analytical aproach of defining influence of permanent magnets on magnetic flux density in the air gap and phase induced voltage. Practical part focus on design of a prototype machine, wich will be used to research the impact of tolerances and imperfections. Parametric model of the prototype machine is created in Maxwell and is subjected to analysis via finite element method. Three different analysis were run, offset of permanent magnet, decrease and wrong dicertion of magnetization. At last the result of cogging torque and induced voltage are compared.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:242180 |
| Date | January 2016 |
| Creators | Vícha, Adam |
| Contributors | Mach, Martin, Bárta, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds