The diploma thesis presents an overview of additive production technologies and a summary of technologies used for 3D metal printing using a robot. All of them are generally described and at the same time assigned to their specific commercial use, or the academic research that deals with them. The work examines the suitability of the material EN ISO 14341-A: G 3Si1 for 3D printing, for which a modification of the Col Metal Transfer technology, Cycle Step is used. The experimental printout of the sample is evaluated on the basis of surface and mechanical tests. Capillary test, examination of microstructure a macrostructure, tensile test and microhardness test. All of them were satisfactory and the suitability of the welding wire for 3D printing was confirmed by the given technology.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443161 |
| Date | January 2021 |
| Creators | Tvrdoň, Radek |
| Contributors | Mrňa, Libor, Sigmund, Marian |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds