The research describes possible reasons why the flaking tendency during cold rolling can vary between different austenitic stainless steels. The flaking phenomenon was observed after a rolling process in Granlund Tools AB’s roll reducing mill “KOR-8”. A literature review was conducted with the purpose of finding a connection between rolling process, austenitic stainless steels and flaking. The laboratory work aimed at revealing possible differences between the flaked material and materials that is known to be cold rolled with high surface finish in the particular machine. In order to come to a conclusion regarding the flaking appearance, scanning electron microscopy (SEM), Vickers hardness test and light optical microscopy (LOM) were performed. The literature review along with the laboratory results made it possible to determine the two major factors affecting the flaking behavior. Two independent analyses revealed what came to be the most important discovery in this study. LOM showed the appearance of a thick oxide scale on the surface of the flaked steel which was further confirmed by SEM-Energy-Dispersive X-ray Spectroscopy that indicated the existence of oxides on the steel’s surface. These observations along with the knowledge that oxide scales grow only during high-temperature processing led to the conclusion that the steel is not appropriate for the cold rolling process due to the earlier steel manufacturing.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-213835 |
Date | January 2016 |
Creators | Åkerlind, Kristina, Jefimova, Zenja |
Publisher | KTH, Materialvetenskap |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0016 seconds