Master thesis deals with design of combusting chamber for gaseous fuels with predicted thermal output less than 30 kilowatts. Designed equipment will be used as a generator of flue gases with required parameters further used for experimental catalytic unit. Due to the need of draft creation inside the combustion chamber and exhaust pipe is master thesis also deals with design of ejector nozzle, which will be used for this purpose. Opening chapters of this work, considering a theoretical part, are focused on basic classification of combustion chambers and industrial burners. Next and main chapter is dedicated to main goal of this work, which is combustion chamber design, containing necessary calculations divided into balance calculation and construction design. Final chapters deals with above mentioned calculation of ejector nozzle ensuring sufficient draft and also sufficient cooling of flue gases incoming from catalytic unit.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231424 |
| Date | January 2014 |
| Creators | Rychter, Aleš |
| Contributors | Hudák, Igor, Skryja, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds