Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2016-07-22T14:59:52Z
No. of bitstreams: 1
HeytorVitorSouzaBezerraDeAzevedo_DISSERT.pdf: 4226943 bytes, checksum: 879f905d96e12f6e15faa6de0fec4be5 (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2016-07-26T22:08:45Z (GMT) No. of bitstreams: 1
HeytorVitorSouzaBezerraDeAzevedo_DISSERT.pdf: 4226943 bytes, checksum: 879f905d96e12f6e15faa6de0fec4be5 (MD5) / Made available in DSpace on 2016-07-26T22:08:45Z (GMT). No. of bitstreams: 1
HeytorVitorSouzaBezerraDeAzevedo_DISSERT.pdf: 4226943 bytes, checksum: 879f905d96e12f6e15faa6de0fec4be5 (MD5)
Previous issue date: 2016-01-29 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior (CAPES) / Comp?sitos ? base de alumina (Al2O3), carbeto de tungst?nio (WC) e cobalto (Co) apresentam propriedades espec?ficas como baixa densidade, alta resist?ncia ? oxida??o, alto ponto de fus?o e elevada in?rcia qu?mica. Esse comp?sito revela ser um material promissor para ser aplicado em diversos campos da engenharia. Este trabalho tem como objetivo avaliar algumas propriedades mec?nicas durante a confec??o e, ap?s a sinteriza??o do comp?sito (Al2O3 - WC - Co). P?s comp?sitos com a composi??o de 80%.p de Al2O3, 18%.p de WC e 2%.p de Co foram processados pela rota de moagem de alta energia (MAE), em moinho planet?rio por 50 horas, bem como por mistura manual em um recipiente de vidro, seguindo a mesma propor??o em peso. Amostras foram coletadas (2, 10, 20, 30, 40 e 50 horas) durante o processo de moagem. Em seguida, os p?s foram prensados no formato de amostra circular com di?metro de 5 mm em uma prensa uniaxial com press?es de 200 e 400 MPa. A sinteriza??o ocorreu de duas maneiras: a primeira sinteriza??o via fase s?lida foi realizada ? 1300 ?C e ? 1126 ?C durante 1h com taxa de aquecimento de 10?C/min em forno resistivo sob atmosfera de arg?nio as press?es de compacta??o utilizadas foram de 200 e 400 MPa, a segunda sinteriza??o foi realizada em dilat?metro via fase s?lida ? 1300 ?C com press?o de compacta??o de 200 MPa, tamb?m foi realizada em dilat?metro outra sinteriza??o, desta vez por fase l?quida ? 1550 ?C com press?es de compacta??o de 200 e 400 MPa, obedecendo os mesmos par?metros utilizados no forno resistivo. As mat?rias-primas foram caracterizadas por difra??o de raios X - (DRX), fluoresc?ncia de raios X - (FRX), microscopia eletr?nica de varredura (MEV), espectroscopia por dispers?o de energia (EDS) e particulometria a laser. As amostras sinterizadas foram submetidas a ensaios de microdureza. Os resultados mostraram que a moagem de alta energia atingiu os objetivos quanto ao tamanho de part?cula e a densifica??o do comp?sito. Entretanto, a microdureza n?o alcan?ou resultados significativos, isso ? um ind?cio que o comp?sito possui baixa tenacidade ? fratura. / Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 ? WC ? Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 ?C for 1 hour with a heating rate of 10 ?C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 ?C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 ?C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X ? ray diffraction (XRD), X ? ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.
| Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/21026 |
| Date | 29 January 2016 |
| Creators | Azevedo, Heytor Vitor Souza Bezerra de |
| Contributors | 05012180410, http://lattes.cnpq.br/9858094266525225, Costa, Francine Alves da, 45327220478, http://lattes.cnpq.br/8698567925323942, Silva, Ariadne de Souza, 00735940401, http://lattes.cnpq.br/5623381698478389, Tavares, Elcio Correia de Souza, 49047914449, http://lattes.cnpq.br/4400396552273448, Gomes, Uilame Umbelino |
| Publisher | Universidade Federal do Rio Grande do Norte, PROGRAMA DE P?S-GRADUA??O EM CI?NCIA E ENGENHARIA DE MATERIAIS, UFRN, Brasil |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | Portuguese |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
| Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0026 seconds