Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2016-10-11T20:53:57Z
No. of bitstreams: 1
SistanleyJonesLimaBispo_TESE.pdf: 3279866 bytes, checksum: 4e4c98181eb5b9e3145660daab8debff (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2016-10-14T20:57:44Z (GMT) No. of bitstreams: 1
SistanleyJonesLimaBispo_TESE.pdf: 3279866 bytes, checksum: 4e4c98181eb5b9e3145660daab8debff (MD5) / Made available in DSpace on 2016-10-14T20:57:44Z (GMT). No. of bitstreams: 1
SistanleyJonesLimaBispo_TESE.pdf: 3279866 bytes, checksum: 4e4c98181eb5b9e3145660daab8debff (MD5)
Previous issue date: 2016-06-03 / Esta pesquisa apresenta uma abordagem a cerca do processo de reciclagem do polipropileno refor?ado com fibras de curau? reprocessado. Sendo uma proposta alternativa de refor?o aos comp?sitos polim?ricos. Teores de fibras de 0%, 10%, 20% e 30% foram analisados para verifica??o de suas propriedades mec?nicas comparando-as, inclusive com as propriedades do polipropileno (PP). Os biocomp?sitos granulados foram preparados em uma extrusora. Os corpos de prova foram moldados por processo de inje??o e submetidos aos ensaios mec?nicos de tra??o uniaxial, flex?o em tr?s pontos e impacto. Para verifica??o de danos aos corpos de prova utilizou-se da an?lise por microscopia eletr?nica de varredura (MEV). Estes biocomp?sitos tamb?m foram submetidos a ensaios f?sico - qu?micos de ?ndice de fluidez (IF). Observou-se que os biocomp?sitos de polipropileno com 30% de fibras de curau? apresentaram maior m?dulo de elasticidade e menor resist?ncia ao impacto. Para todos os biocomp?sitos, os valores encontrados nos ensaios de tra??o para os limites de escoamento e tens?o de ruptura n?o sofreram altera??es ? medida que se adicionavam as fibras. Outros pontos relevantes foram o aumento da resist?ncia ? flex?o, a redu??o da degrada??o t?rmica das misturas polipropileno e fibras de curau?, e o n?o comprometimento de uma forma em geral, da fabrica??o dos biocomp?sitos, quando analisados por microscopia eletr?nica de varredura. / This research presents an approach about the polypropylene recycling process reinforced with curau? reprocessed fibers. As an alternative proposal reinforcement to polymeric composites. Levels of 10 %, 20 % and 30 % of fibers in the biocomposites were analyzed to check their mechanical properties comparing them, even with the properties of polypropylene (PP). Pellets biocomposites were prepared by the extrusion process, and the specimens were manufactured by injection process and subjected to mechanical tests of uniaxial tensile, three point bending and impact. To check for damage to the specimens was used to analysis by scanning electron microscopy (SEM). These biocomposites were also subjected to testing physical ? chemistry of index of fluidity (IF). It was observed that the polypropylene biocomposites with 30 % curau? fibers showed higher elastic modulus for both traction and to flexion and less resistance to impact. For all biocomposites, the values found in tensile tests to the limits of flow and maximum voltage have approximate values as they were added the curau? fibers. Another important point was increased resistance to bending in biocomposite as promoting the addition of curau? fibers and decrease as they were reprocessed also decreased thermal degradation of the polypropylene blends and curau? fibers, and no impairment of so in general, the production of biocomposites, when analyzed by scanning electron microscopy.
| Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/21421 |
| Date | 03 June 2016 |
| Creators | Bispo, Sistanley Jones Lima |
| Contributors | 02306444498, http://lattes.cnpq.br/1042806990155996, Melo, Anderson Clayton Alves de, 87652919487, http://lattes.cnpq.br/5242440649066569, Felipe, Raimundo Nonato Barbosa, 39357392491, http://lattes.cnpq.br/7520491414631153, Felipe, Renata Carla Tavares Santos, 52368700463, http://lattes.cnpq.br/6720439923599015, Amorim J?nior, Wanderley Ferreira de, 87244152434, http://lattes.cnpq.br/8131607733881361, Freire J?nior, Raimundo Carlos Silverio |
| Publisher | PROGRAMA DE P?S-GRADUA??O EM ENGENHARIA MEC?NICA, UFRN, Brasil |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis |
| Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0023 seconds