Programmable matter is a material whose properties can be programmed to achieve particular shapes or mechanical properties upon command. This is an essential technique that could one day lead to morphing aircraft and ground vehicles. Metamaterials are the rationally designed artificial materials whose properties are not observed in nature. Their properties are typically controlled by geometry rather than chemical compositions. Combining metamaterials with a programmable function will create a new area in the intelligent material design. The objective of this study is to design and demonstrate a tunable metamaterial and to investigate its thermo-mechanical behavior. An integrated approach to the metamaterial design was used with analytical modeling, numerical simulation, and experimental demonstration. The dynamic thermo-mechanical analysis was used to measure base materials' modulus and thermal expansion coefficient as a function of temperature. CPS, the unit cell of the metamaterial, is composed of circular holes and slits. By decomposing kinematic rotation of the arm and elastic deformation of a bi-material hinge, thermo-mechanical constitutive models of CPS were developed and it was extended to 3D polyhedral structures for securing isotropic properties. Finite element based numerical simulations of CPS and polyhedral models were conducted for comparison with the analytical model. 3D printing of multi-materials was used for sample fabrication followed by tests with uniaxial compressive mechanical tests and thermal tests at 50℃. From the analytical model of the metamaterial, the contour plots were obtained for the effective properties – Poisson's ratio, the effective coefficient of thermal expansion of the metamaterial as a function of geometry and materials. A controllable range of temperature and strain was identified associated with maximized thermal expansion mismatch and contact on the slit surface of CPS, respectively. This work will pave the road toward the design of programmable metamaterials with both mechanically- and thermally- tunable capability and provide unique thermo-mechanical properties with a programmable function.
Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc955088 |
Date | 12 1900 |
Creators | Heo, Hyeonu |
Contributors | Ju, Jaehyung, 1973-, Choi, Tae-Youl, D'Souza, Nandika, Li, Xiaohua |
Publisher | University of North Texas |
Source Sets | University of North Texas |
Language | English |
Detected Language | English |
Type | Thesis or Dissertation |
Format | Text |
Rights | Public, Heo, Hyeonu, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved. |
Page generated in 0.1295 seconds