The aim of the Diploma Thesis is to discuss the design and construction solution for circulation of the thermodynamic heat pump especially used in the heating industry with stoichiometric combustion of chosen natural gas. The basic components of the proposed heat pump are turbine, compressor and gearbox. To solve the presented aims, the thermodynamic calculation of the individual components, the determination of the efficiency of the whole equipment and the analysis of the physical properties of the natural gas with regard to the specified input and output parameters were considered. In addition, an analysis of the individual components design of the proposed equipment was carried out, on the basis the technically most acceptable variant was chosen and the equipment construction was carried out incl. connecting elements. Drawing documentation is part of the attachments. On the basis of the analysis, it can be stated that the proposed plant leads to energy savings, is ecologically sufficient and has been shown to have approximately twice the amount of heat dissipated than without its use.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:316916 |
| Date | January 2017 |
| Creators | Kadlec, Stanislav |
| Contributors | Škorpík, Jiří, Fiedler, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds