Digital audio networks are becoming the preferred solution for the interconnection of professional audio devices. Prominent amongst their advantages are: reduced noise interference, signal multiplexing, and a reduction in the number of cables connecting networked devices. In the context of professional audio, digital networks have been used to connect devices including: mixers, effects units, preamplifiers, breakout boxes, computers, monitoring controllers, and synthesizers. Such networks are governed by protocols that define the connection management rocedures, and device synchronization processes of devices that conform to the protocols. A wide range of digital audio network control protocols exist, each defining specific hardware requirements of devices that conform to them. Device parameter control is achieved by sending a protocol message that indicates the target parameter, and the action that should be performed on the parameter. Typically, a device will conform to only one protocol. By implication, only devices that conform to a specific protocol can communicate with each other, and only a controller that conforms to the protocol can control such devices. This results in the isolation of devices that conform to disparate protocols, since devices of different protocols cannot communicate with each other. This is currently a challenge in the professional music industry, particularly where digital networks are used for audio device control. This investigation seeks to resolve the issue of interoperability between professional audio devices that conform to different digital audio network protocols. This thesis proposes the use of a proxy that allows for the translation of protocol messages, as a solution to the interoperability problem. The proxy abstracts devices of one protocol in terms of another, hence allowing all the networked devices to appear as conforming to the same protocol. The proxy receives messages on behalf of the abstracted device, and then fulfills them in accordance with the protocol that the abstracted device conforms to. Any number of protocol devices can be abstracted within such a proxy. This has the added advantage of allowing a common controller to control devices that conform to the different protocols.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:rhodes/vital:4601 |
| Date | January 2010 |
| Creators | Igumbor, Osedum Peter |
| Publisher | Rhodes University, Faculty of Science, Computer Science |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MSc |
| Format | 204 p., pdf |
| Rights | Igumbor, Osedum Peter |
Page generated in 0.002 seconds