Return to search

Obchodní a nákupní centrum v Brně / Trade House in Brno

The final thesis deals with the design of the steel loadbearing structure of the shopping center situated in Brno. The built-up floor area is 1973 m2 (L-shaped ground plan with dimensions 48 m x 50 m). The construction consists of three parts. Building A has four above-ground floors and reaches a height of 25.5 m. The steel structure of mono-pitched roof is designed in two options. Both options consist of full-length purlins and truss girders. Building B is a single-storey building with a mono-pitched roof top reaching 8.1 m high. Building C is three-storey with a flat roof. The first floor has a construction height of 4.5 m and the remaining two floors reach height of 3.6 m, which coincide with building A. The steel structure is made of steel-concrete composite ceilings and pin-supported columns. In the case of bracings, pressure was eliminated by means of non-linearities.The work includes proposal, assessment of the supporting structure and calculation of the directional details. Internal forces were determined based on a static analysis in the SCIA Engineer calculation program.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:372282
Date January 2018
CreatorsSerbousková, Kateřina
ContributorsSýkora, Karel, Barnat, Jan
PublisherVysoké učení technické v Brně. Fakulta stavební
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds