Volatile organic compounds (VOCs) in air and heavy metal ions, anions, microorganism in water are environmental contaminants that require detection at certain low concentrations to avoid detrimental effects. Analytical instruments can accurately determine the concentration and composition of the contaminants at trace levels. However, these methods require skilled personnel to operate. Hence sensors should have fast response, low maintenance and easy to handle. In the present work, environmental monitoring sensor for volatile organic compounds, anion and E. coli was developed. The sensor is resistive sensor architecture with organic nanocomposite as sensing layer. The conjugated organic molecule with receptor moieties that can interact and exhibit affinity to each of the analyte was designed and synthesized.
A new conducting polymer for sensing toluene, aldehyde is designed and fabricated. The sensor shows highest sensitivity and selectivity for targeted analyte. The sensor response is explained by molecular dynamics simulation. The solubility parameter of the new polymers is calculated by molecular dynamics and is used for elucidation of rationale of the mechanism for selectivity. The interaction energy of the sensing layer calculated by simulation is higher for targeted analyte than that for other analytes. The adsorption of vapors on the sensing layer results in volumetric change of the sensing layer. The effect can be experimentally determined by monitoring the thickness of the film and the change in the parameters such as mass change, capacitance, resistance change, refractive index change that occurs due to absorption of vapors in the polymers. Here, laser Doppler vibrometry, a non contact method is used to measure the displacement occurring due to interaction of a new polymer film with analyte vapors.
A sensor for real time monitoring of nitrate ion concentration in water is fabricated. A new conjugated polymer is designed for selection of nitrate is used as a sensing molecule. The sensor is tested for various concentrations of nitrate ions and possible interferents effect.
An organic nanocomposite based resistive sensor is designed and fabricated to detect E. coli in water. The organic molecule with receptor groups was selected such that receptor group would interact and exhibit affinity to the functional groups present on outer membrane of the cell wall of the E. coli. The resistance change is caused due to interaction and is because of
E. coli acting as p-dopant to sensor molecule. The electrostatic interaction between positively charged amine groups on sensor molecule and negatively charged E. coli is believed to be the interaction mechanism.
This work demonstrates that the conjugated molecules with suitable moieties can bind with analyte like VOCs, heavy metal ions, anions, microorganism, that can be used as sensing element in resistive sensor architecture.
Identifer | oai:union.ndltd.org:IISc/oai:etd.iisc.ernet.in:2005/3651 |
Date | January 2015 |
Creators | Mallya, Ashwini N |
Contributors | Ramamurthy, Praveen C |
Source Sets | India Institute of Science |
Language | en_US |
Detected Language | English |
Type | Thesis |
Relation | G27300 |
Page generated in 0.0013 seconds