The key to the understanding of the mechanical behavior of dual phase (DP) steels is to a large extent to be found in the microstructure. The microstructure is in its turn a result of the chemical composition and the process parameters during its production. In this thesis the connection between microstructure and mechanical properties is studied, with focus on the microstructure development during annealing in a continuous annealing line. In-line trials as well as the lab simulations have been carried out in order to investigate the impact of alloying elements and process parameters on the microstructure. Further, a dislocation model has been developed in order to analyze the work hardening behavior of DP steels during plastic deformation. From the in-line trials it was concluded that there is an inheritance from the hot rolling process both on the microstructure and properties of the cold rolled and annealed product. Despite large cold rolling reductions, recrystallization and phase transformations, the final dual phase steel is still effected by process parameters far back in the production chain, such as the coiling temperature following the hot rolling. Lab simulations showed that the microstructure and consequently the mechanical properties are impacted not only by the chemical composition of the steel but also by a large number of process parameters such as soaking temperature, cooling rate prior to quenching, quench and temper annealing temperature. / QC 20101004
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-24869 |
| Date | January 2010 |
| Creators | Granbom, Ylva |
| Publisher | KTH, Mekanisk metallografi, Stockholm : KTH |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds