The present work describes the development of a control scheme for boost-type switch-mode rectifiers. While controllers for this circuit commonly use a shunt resistor or a magnetic field sensor to measure the instantaneous input or inductor current, here the inductor current is computed from the measured inductor voltage. This calculation requires knowledge of the physical properties of the inductor, most importantly its inductance, which are prone to change with operating conditions of the converter and throughout the lifetime of the inductor. The parameters of the inductor model are estimated during normal converter operation, and the inductor model is adapted accordingly. Simulation and experimental results confirm the effectiveness of the devised scheme in reducing the distortion of the input current. / Graduate / 0544 / aengel@uvic.ca
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:BVIV.1828/4637 |
| Date | 28 May 2013 |
| Creators | Engel, Adrian |
| Contributors | Nandi, Subhasis |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English, English |
| Detected Language | English |
| Type | Thesis |
| Rights | Available to the World Wide Web |
Page generated in 0.0018 seconds