Fuel cells are a clean, high-efficiency source for power generation. This innovative technology is going to penetrate all aspects in our life, from utility distributed power, transportation applications, down to power sources for portable devices such as laptop computer and cell phones. To enable the usage of fuel cell, developing power converters dedicated for fuel cells becomes imminent.
Currently, the full-bridge converter is the dominating topology in high power dc/dc applications. Although multiphase converters have been proposed, most of them are dealing with high input-voltage systems, and their device characteristic is not suitable for a low voltage source such as a fuel cell. For a high power fuel cell system, high voltage conversion ratios and high input currents are the major obstacles to achieving high-efficiency power conversions. This dissertation proposes a novel 3-phase 6-leg dc/dc power converter with transformer isolation to overcome these obstacles. Major features of the proposed converter include: (1) Increase converter power rating by paralleling phases, not by paralleling multiple devices; (2) Double the output voltage by transformer delta-wye connection, thus lowering the turns-ratio; (3) Reduce the size of output filter and input dc bus capacitor with interleaved control; (4) Achieve Zero-Voltage Zero-Current Switching (ZVZCS) over a wide load range without auxiliary circuitry. High conversion efficiency above 96% is verified with different measurement approaches in experiments.
This dissertation also presents the power stage and control design for the proposed converter. Control design guideline is provided and the design result is confirmed with both simulation and hardware experiments. When using the fuel cell for stationary utility power applications, a low-frequency ripple interaction was identified among fuel cell, dc/dc converter and dc/ac inverter. This low frequency ripple tends to not only damage the fuel cell, but also reduce the source capability. This dissertation also investigates the mechanism of ripple current propagation and exploits the solutions. A linearized ac model is derived and used to explain the ripple propagation. An active ripple reduction technique by the use of the current loop control is proposed. This active current loop control does not add extra converters or expensive energy storage components. Rather, it allows a reduction in capacitance because the ripple current flowing into the capacitor is substantially reduced, and less capacitance can be used while maintaining a clean dc bus voltage. The design process and guideline for the proposed control is suggested, and the effectiveness of this active control is validated by both simulation and experimental results. / Ph. D.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/26048 |
Date | 28 January 2005 |
Creators | Liu, Changrong |
Contributors | Electrical and Computer Engineering, Lai, Jih-Sheng, Lee, Fred C., Chen, Dan Y., Lu, Guo-Quan, Liu, Yilu |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Dissertation |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | Dissertation_ChLiu.pdf |
Page generated in 0.0022 seconds