This master’s thesis focuses on the heat treatment of the aluminium alloy AlSi7Mg0,6 and also investigates the effects of different coolants usage on its mechanical properties. First part is dedicated to the description of aluminium alloys, their chemical composition, behaviour and mechanical properties with particular attention to the Al-Si-Mg alloys. This part was followed by the summary of commonly used heat treatment of aluminium alloys. The third part is dedicated to the experiment. Castings and test specimens were wax casted at Alucast, s.r.o. company. After annealing, the samples were quickly cooled down in four different coolants and underwent tensile testing. Their mechanical properties (tensile strength, yield point and ductility) were evaluated as well as microstructure. In the last part, the achieved results are presented.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400483 |
| Date | January 2019 |
| Creators | Ostrézí, Barbora |
| Contributors | Cileček, Jarmil, Horáček, Milan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds