Submitted by Sandra Pereira (srpereira@ufrrj.br) on 2017-04-27T11:59:34Z
No. of bitstreams: 1
2012 - Cintia Silva Nunes.pdf: 1126230 bytes, checksum: 45346dd33d53277fd3bc88d1d3d22157 (MD5) / Made available in DSpace on 2017-04-27T11:59:34Z (GMT). No. of bitstreams: 1
2012 - Cintia Silva Nunes.pdf: 1126230 bytes, checksum: 45346dd33d53277fd3bc88d1d3d22157 (MD5)
Previous issue date: 2012-06-29 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior - CAPES / Heat treatment provides desirable characteristics to the wood such as higher dimensional
stability, higher natural durability and, in some cases, changes on original color. However, the
treatment can also drastically alter the physical and chemical characteristics of wood surfaces,
which affect the adhesion quality and coating application. In this context, the objectives of
this study were: (1) to evaluate the effect of heat treatmens on physical properties (density,
equilibrium moisture content and mass loss) of Corymbia citriodora (Hook.) K.D. Hill &
L.A.S. Johnson and Eucalyptus pellita F. Muell. woods; (2) to determine the effect of heat
treatment on color change of both woods; (3) to evaluate the effect of heat treatments on
adhesion quality of glued joints by shear strength testing; and (4) to evaluate the effect of
physical and chemical modifications following heat treatment on adhesion characteristics.
Heat treatments were performed in a laboratorial electric oven at 180 and 200?C. Color
measurements were carried out on the CIE-L*a*b* space by using the CM-2600d portable
spectrophotometer. Shear strength tests of the glued joints and solid woods were performed
according to ASTM D 905 and ASTM D 143 standards, respectively. Three adhesive types
were used: resorcinol, resorcinol-tannin 80:20 and resorcinol-tannin 60:40. Density and
equilibrium moisture content of both wood species were reduzed by heat treatment. Both
woods had mass loss, which increased with the increase of temperature and was more
pronounced for Eucalyptus pellita. The original color of the woods changed following heat
treatment, mainly to Eucalyptus pellita. The shear strength of solid wood and glued joints of
both species was severely affected by heat treatments. The resorcinol-tannin 80:20 adhesive
showed the best performance for untreated woods, however, after heat treatment, the adhesive
type did not affect the shear strength. Glued joints of heat-treated woods had high percentage
of wood failure due to higher porosity and adhesive penetration. The acidity of heat-treated
woods affected the shear strength and presented a strong correlation with equilibrium
moisture content due to degradation of hemicelluloses. Heat treatments at 180 and 200oC are
extremely severe to Corymbia citriodora and Eucalyptus pellita woods / O tratamento de termorretifica??o proporciona ? madeira caracter?sticas desej?veis tais como
maior estabilidade dimensional, maior durabilidade natural e, em alguns casos, altera??o da
cor original. Entretanto, o tratamento tamb?m pode alterar drasticamente as caracter?sticas
f?sicas e qu?micas das superf?cies da madeira, as quais afetam a qualidade de ades?o e a
aplica??o de revestimentos. Neste contexto, os objetivos deste estudo foram: (1) avaliar o
efeito dos tratamentos nas propriedades f?sicas (densidade, teor de umidade de equil?brio e
perda de massa) da madeira de Corymbia citriodora (Hook.) K.D. Hill & L.A.S. Johnson e
Eucalyptus pellita F. Muell.; (2) determinar o efeito dos tratamentos termorretificadores na
altera??o da cor da madeira de ambas as esp?cies; (3) avaliar o efeito dos tratamentos na
qualidade de ades?o de juntas coladas atrav?s de testes de resist?ncia ao cisalhamento; e (4)
avaliar o efeito das altera??es f?sicas e qu?micas causadas pela termorretifica??o nas
caracter?sticas de ades?o. A termorretifica??o foi realizada em um forno mufla el?trico
laboratorial a 180 e 200?C. As medi??es de cor foram realizadas no espa?o CIE-L*a*b* com
o aux?lio do espectrofot?metro port?til CM-2600d. Os ensaios de cisalhamento das juntas de
madeira colada e das madeiras s?lidas foram realizados segundo as normas ASTM D 905 e
ASTM D 143, respectivamente. Foram utilizados tr?s tipos de adesivos: resorcinol,
resorcinol-tanino 80:20 e resorcinol-tanino 60:40. A densidade aparente e o teor de umidade
de equil?brio das madeiras de ambas as esp?cies foram reduzidos pela termorretifica??o.
Ambas as madeiras apresentaram perda de massa, sendo esta crescente com o aumento da
temperatura e mais acentuada para a madeira de Eucalyptus pellita. A cor original das
madeiras foi alterada pelo tratamento, principalmente para o Eucalyptus pellita. A resist?ncia
ao cisalhamento da madeira s?lida e das juntas coladas de ambas as esp?cies foi severamente
afetada pelos tratamentos termorretificadores. O adesivo resorcinol-tanino 80:20 apresentou o
melhor desempenho para as madeiras n?o termorretificadas de ambas as esp?cies; entretanto,
ap?s a termorretifica??o, o tipo de adesivo n?o afetou a resist?ncia ao cisalhamento. As juntas
coladas das amostras de madeiras termorretificadas apresentaram uma alta porcentagem de
falhas na madeira devido ? maior porosidade e maior penetra??o do adesivo. A acidez das
amostras da madeira termorretificada afetou a resist?ncia ao cisalhamento e apresentou uma
forte correla??o com o teor de umidade de equil?brio devido ? degrada??o das hemiceluloses.
Os tratamentos termorretificadores a 180 e 200?C s?o extremamente severos para as madeiras
de Corymbia citriodora e Eucalyptus pellita
| Identifer | oai:union.ndltd.org:IBICT/oai:localhost:jspui/1560 |
| Date | 29 June 2012 |
| Creators | Nunes, Cintia Silva |
| Contributors | Garcia, Rosilei Aparecida, Nascimento, Alexandre Miguel do, Lelis, Roberto Carlos Costa, Vidaurre, Graziela Baptista, Carvalho, Alexandre Monteiro de |
| Publisher | Universidade Federal Rural do Rio de Janeiro, Programa de P?s-Gradua??o em Ci?ncias Ambientais e Florestais, UFRRJ, Brasil, Instituto de Florestas |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
| Format | application/pdf |
| Source | reponame:Biblioteca Digital de Teses e Dissertações da UFRRJ, instname:Universidade Federal Rural do Rio de Janeiro, instacron:UFRRJ |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 6 REFER?NCIAS BIBLIOGR?FICAS AHAJJI, A.; DIOUF, P. N.; ALOUI, F.; ELBAKALI, I.; PERRIN, D.; MERLIN, A.; GEORGE, B. Influence of heat treatment on antioxidant properties and colour stability of beech and spruce wood and their extractives. Wood Science and Technology, v. 43, p. 69- 83, 2009. AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D 143. Standard methods of testing small clear specimens of timber. ASTM Standards, 1994. p. 24-65. Annual book. AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D 3110. Standard specification for adhesives used in nonstructural glued lumber products. ASTM Standards, 1994. p. 184-192. Annual book. AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D 905. Standard test method for strength properties of adhesive bonds in shear by compression loading. ASTM Standards, 1994. p. 20-26. Annual book. AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D 2395. Standard test methods for specific gravity of wood and wood-based materials. ASTM Standards, 1999. p. 350-357. Annual book. AKYILDIZ, M. H.; ATES, S. Effect of heat treatment on equilibrium moisture content (EMC) of some wood species in Turkey. Research Journal of Agriculture and Biological Sciences, v. 4, n. 6, p. 660-665, 2008. AKYILDIZ, M. H.; ATES, S.; OZDEMIR, H. Technological and chemical properties of heattreated Anatolian black pine wood. Jornal of Biotechnology, v. 8, n. 11, p. 2565-2572, 2009. ANDRADE, E. N. O eucalipto. S?o Paulo: Ch?caras e Quintais, 1939. 122p. AWOYEMI, L.; JONES, I. P. Anatomical explanations for the changes in properties of western red cedar (Thuja plicata) wood during heat treatment. Wood Science and Technology, v. 45, p. 261-267, 2011. AYADI, N.; LEJEUNE, F.; CHARRIER, F.; CHARRIER, B.; MERLIN, A. Color stability of heat-treated wood during artificial weathering. Holz als Roh-und Werkstoff, v. 61, n. 3, p. 221-226, 2003. BEKHTA, P.; NIEMZ, P. Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung, v. 57, n. 5, p. 539-546, 2003. BOLLAND, D. J.; BROOKER, M. H.; CHIPPENDALE, G. M. Forest trees of Australia. 4. ed. Melbourn: CSIRO, 1994. 703p. BOONSTRA, M. J.; ACKER, J. van; KEGEL, E.; STEVENS, M. Optimisation of a two-stage heat treatment process: durability aspects. Wood Science and Technology, v. 41, p. 31-57, 2007. 49 BOONSTRA, M. J.; TJEERDSMA, B. Chemical analysis of heat treated softwoods. Holz als Roh-und Werkstoff, v. 64, p. 204-211, 2006. BORGES, L. M.; QUIRINO, W. F. Higroscopicidade da madeira de Pinus caribaea var. hondurensis tratado termicamente. Biomassa & Energia, v. 1, n. 2, p. 173-182, 2004. BOURGOIS, J.; GUYONNET, R. Charaterization and analysis of torrified wood. Wood Science and Technology, v. 22, n. 2, p. 143-155, 1988. BRITO, J. O. Estudo das influ?ncias da temperatura, taxa de aquecimento e densidade da madeira de Eucalyptus maculata e Eucalyptus citriodora sobre os res?duos s?lidos da pir?lise. 1992. 81 f. Tese (Livre Doc?ncia) ? Escola Superior de Agricultura Luiz de Queiroz, Piracicaba, SP, 1992. BRITO, J. O.; GARCIA, J. N.; BORTOLETTO J?NIOR, G.; PESSOA, A. M. C.; SILVA, P. H. M. Densidade b?sica e retratibilidade da madeira de Eucalyptus grandis submetida a diferentes temperaturas de termorretifica??o. Cerne, v. 12, n. 2, p. 182-188, 2006. BRITO, J. O.; SILVA, F. G.; LE?O, M. M.; ALMEIDA G. Chemical composition changes in eucalyptus and pinus woods submitted to heat treatment. Bioresource Technology, v. 99, n. 8, p. 8545-8548, 2008. CALONEGO, F. W. Efeito da termorretifica??o nas propriedades f?sicas, mec?nicas e na resist?ncia a fungos deterioradores da madeira de Eucalyptus grandis Hill. ex. Maiden. 2009, 149 f. Tese (Doutorado em Agronomia ? Energia na Agricultura) ? Universidade Estadual Paulista J?lio de Mesquita Filho, Botucatu, SP, 2009. CAMARGOS, J. A. A. Colorimetria quantitativa aplicada na elabora??o de um cat?logo de cores de madeiras tropicais. 1999. 75 f. Disserta??o (Mestrado em Ci?ncias Florestais) ? Universidade de Bras?lia, Bras?lia, DF, 1999. CHRISTIANSEN, A. W. Effect of overdrying of yellow-poplar veneer on physical properties and bonding. Holz als Roh-und Werkstoff, v. 52, p. 139-149, 1994. COSTA, T. D. L. Resist?ncia de composi??es adesivas expostas a condi??es de servi?o externo e interno. 2006. 54 f. Disserta??o (Mestrado em ci?ncias ambientais e Florestais) ? Universidade Federal Rural do Rio de Janeiro, Serop?dica, RJ, 2006. DOMBRO, D. B. Eucalyptus pellita: Amazonia Reforestation?s red mahogany. Planeta Verde Reforestaci?n S.A., 2010. 8 p. DUBEY, M. K. Improvements in stability, durability and mechanical properties of radiata pine wood after heat-treatment in a vegetable oil. 2010. 191 p. Tese (Doctor Philosophy in Forestry) University of Canterbury, New Zealand, 2010. DUBEY, M. K.; PANG, S.; WALKER, J. Effect of oil heating age on colour and dimensional stability of heat treated Pinus radiata. European Journal of Wood and Wood Products, v. 69, p. 255-262, 2011. 50 ESTEVES, B.; DOMINGOS, I.; PEREIRA, H. Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200oC. Forest Produts Journal, v. 57, n. ?, p. 47-52, 2007a. ESTEVES, B.; MARQUES, A.V.; DOMINGOS, I.; PEREIRA, H. Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Science and Technology, v.41, n.3, p.193-207, 2007b. ESTEVES, B.; VELEZ, M. A.; DOMINGOS, I.; PEREIRA, H. Heatinduced colour changes of pine (Pinus pinaster) and eucalyptus (Eucalyptus globulus) wood. Wood Science and Technology, v. 42, n. 5, p. 369-384, 2008. FENGEL, D.; WEGENER, G. Wood ? chemistry, ultrastructure, reactions. Berlin: Walter de Gruyter, 1984. FIGUEROA, M. J. M.; MORAES, P. D. Comportamento da madeira a temperaturas elevadas. Ambiente Contru?do, Porto Alegre, v. 9, n. 4, p. 157-174, 2009. FINNISH THERMOWOOD ASSOCIATION. ThermoWood? Handbook. Finland: Helsinki, 66 p., 2003. FINNFOREST. ThermoWood? - Durable and environmentally sound solution. Finnforest, 8 p., 2010. FOLLRICH, J.; M?LLER, U.; GINDL, W. Effects of thermal modification on the adhesion between spruce wood (Picea abies Karst.) and a thermoplastic polymer. Holz als Roh-und Werkstoff, v. 64, p. 373-376, 2006. FOREST PRODUCTS LABORATORY. Wood handbook - Wood as an engineering material. General Technical Report FPL?GTR?190. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 2010, 508 p. GARCIA, R. A.; CARVALHO, A. M.; LATORRACA, J. V. F.; MATOS, J. L. M.; SANTOS, W. A.; SILVA, R. F. M. Nondestructive evaluation of heat-treated Eucalyptus grandis Hill ex Maiden wood using stress wave method. Wood Science and Technology, v. 46, p. 41-52, 2012. GARROTE, G.; DOMINGUEZ, H.; PARAJ?, J. C. Hydrothermal processing of lignocellulosic materials. Holz als Roh-und Werkstoff, v. 57, n. 3, p. 191-202, 1999. GAVRILOVI?-GRMU?A, I.; MILJKOVI?, J.; ?IPOROVI?-MOM?ILOVI?, M. Penetration of urea-formaldehyde adhesives in wood tissue. Part I: radial penetration of UF adhesives into beech. Biblid, n. 98, p. 39-48, 2008. GHALEHNO, M. D.; NAZERIAN, M. Changes in the physical and mechanical properties of Iranian hornbeam wood (Carpinus betulus) with heat treatment. European Journal of Scientific Research, v. 51, n. 4, p. 490-498, 2011. GIEBELER, E. Dimensional stabilization of wood by moisture heat pressure treatment. European Journal of Wood and Wood Products, v. 41, n. 3, p. 87-94, 1983. 51 GONZ?LEZ-PENA, M. M.; HALE, M. D. C. Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: Colour evolution and colour changes. Holzforschung, v. 63, p. 385-393, 2009. GOUVEIA, F. N. Aplica??o de tratamentos t?rmicos para estabiliza??o colorim?tricas de madeiras tropicais. 2008. 130 p. Tese (Doutorado em Ci?ncia Florestal) ? Universidade de Bras?lia, Bras?lia, DF, 2008. GRIGSBY, W.; WARNES, J. Potential of tannin extracts as resorcinol replacements in cold cure thermoset adhesives. Holz als Roh- und Werkstoff, v. 62, n. 6, p. 433-438, 2004. GUEDIRA, F. Pyrolyse lente de la biomasse: comportement compar? des tourteux d?olives, de la bagasse de canne ? sucre et de la sciure de bois (Pin maritime). 1988. 122p. Tese (Doutorado) ? Universit? Mohamed V, Maroc, 1988. GUNDUZ, G.; KORKUT, S.; AYDEMIR, D.; BEKAR, I. The density, compression strength and surface hardness of heat treated hornbeam (Capinus betulus) wood. Maderas. Ciencia y Tecnolog?a, v. 11, n. 1, p. 61-70, 2009. GUNDUZ, G.; AYDEMIR, D.; KORKUT, S. The effect of heat treatment on some mechanical properties and color changes of Uludag Fir wood. Drying Technology, v. 28, p. 249-255, 2010. HASS, P.; WITTEL, F. K.; MENDOZA, M.; HERRMANN, H. J.; NIEMZ, P. Adhesive penetration in beech wood: experiments. Wood Science and Technology, v. 46, p. 243-256, 2012. HILL, K. D.; JOHNSON, L. A. S. Sistematic studies in eucalyptus. 7. A revision of the bloodwoods genus Corymbia (Myrtaceae). Telopea, v. 6, p. 173-505, 1995. HILL, C. Wood modification-chemical, thermal and other processes. England: John Wiley & Sons Press, 2006. IBACH, R. E. Specialty treatments. In: FOREST PRODUCTS LABORATORY. Wood handbook ? Wood as an engineering material. General Technical Report FPL-GTR-190. Madeison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 2010, 508 p. INSTITUTO DE PESQUISAS E ESTUDOS FLORESTAIS ? IPEF. http://www.ipef.br/identificacao/cief/lista.asp. Acessado em 30/05/2012. INSTITUTO DE PESQUISAS TECNOL?GICAS DO ESTADO DE S?O PAULO ? IPT. Madeira: uso sustent?vel na constru??o civil. S?o Paulo: Instituto de Pesquisas Tecnol?gicas/ SVMA: SindusCon-SP, 2003. 59 p. KAMDEM, D. P.; PIZZI, A.; JERMANNAUD, A. Durability of heat-treated wood. Holz als Roh-und Werkstoff, v. 60, n. 1, p. 1-6, 2002. 52 KIM, S.; KIM, H. J. Evaluation of formaldehyde emission of pine and wattle tannin-based adhesives by gas chromatography. Holz als Roh-und Werkstoff, v. 62, n. 2, p. 101-106, 2004. KOCAEFE, D.; PONCS?K, S.; DOR?, G.; YOUNSI, R. Effect of heat treatment on the wettability of white ash and softmaple by water. Holz als Roh-und Werkstoff, v. 66, n. 5, p. 355-361, 2008 KOL, H. S.; OZBAY, G.; ALTUN, S. Shear strength of heat treated tali (Erytrhophleum ivorense) and iroko (Chlorophora excelsa) woods, bonded with various adhesives. BioResources, v. 4, n. 4, p. 1545 -1554, 2009. KOLLMANN, F.; FENGEL, D. Changes in the chemical composition of wood by thermal treatment. Holz als Roh-und Werkstoff, v. 23, n. 12, p. 461-468, 1965. KOLLMANN, F.; SCHNEIDER, A. On the sorption-behaviour of heat stabilized wood. Holz als Roh-und Werkstoff, v. 21, n. 3, p. 77-85, 1963. KORKUT, D. S.; KORKUT, S.; DILIK, T. Effect of heat treatment os some mechanical properties of laminated window profiles manufactured using two types of adhesives. International Journal of Molecular Sciences, v. 9, n. 4, p. 454-463, 2008. KONICA MINOLTA SENSING Inc. Comunica??o precisa da cor. 1998. 57 p. KRETSCHMANN, D. E.; GREEN, D. W. Modeling moisture content-mechanical property relationships for clear southern pine. Wood and Fiber Science, v. 28, n. 3, p. 320-337, 1996. KROKAN, F. J. N. Invent?rio florestal das ?reas reflorestadas no Estado de S?o Paulo. S?o Paulo: Secret?ria do estado de Meio Ambiente/ Instituto Florestal, 2002. 148p. LELIS, R. C. C. Zur Bedeutung der Kerninhaltsstoffe obligatorisch verkernter Nadelbaumarten bei der Herstellung von feuchtbest?ndigen und biologisch resistenten Holzspanplatten, am Beispiel der Douglasie (Pseudotsuga menziesii Mirb. Franco). 1995. 256p. Tese (Doutorado em Ci?ncia Florestal) ? Universit?t G?ttingen, G?ttingen, 1995. LEPAGE, E. S. Qu?mica da madeira. In: LEPAGE, E. S. Manual de preserva??o de madeiras. 2. ed. S?o Paulo: Instituto de Pesquisas Tecnol?gicas, 1986. p.69-98. LIMA, J. T.; BRESSE, M. C.; CAHALAN, C. M. Variation in wood densidy mechanical properties in Eucalyptus clones. In: THE FUTURE OF EUCALYPTUS FOR WOOD PRODUCTS. 2000, Lauceston, Tasmania. Proccedings... Lauceston: IUFRO. LORENZI, H.; SOUZA, H. M. de; TORRES, M. A. V.; BACHER, L. B. ?rvores ex?ticas no Brasil: madeireiras, ornamentais e arom?ticas. S?o Paulo: Instituto Plantarum, 2003, 368 p. MACLEAN, J. D. Preservative treatment of wood by pressure methods. Washington, D.C.: Ag. Hdbk. No. 40. U.S. Dept. of Agriculture. 1952, 160 p. 53 MANNINEN, A. M.; PASANEN, P.; HOLOPAINEN, J. K. Comparing the VOC emissions between air-dried and heat-treated Scots pine wood. Atmospheric Environment, v. 36, n. 11, p. 1763-1768, 2002. MARRA, G. G. The role of adhesion and adhesives in products industry. In: WOOD ADHESIVES RESEARCH, APLLICATION AND NEEDS. 1980, Washington. Proceedings... Washington: USDA-PFL, 1980. p. 1-8. MAZELA, B.; ZAKRZEWSKI, R.; GRZES KOWIAK, W.; COFTA, G.; BARTKOWIAK, M. Resistance of thermally modified wood to basidiomycetes. Wood Technology, v. 7, n. 1, p. 253-262, 2004. MELO, A.V.; MANTILLA CARRASCO, E. V. M. An?lise de adesivos em madeira laminada colada. In: IX ENCONTRO BRASILEIRO EM MADEIRA E EM ESTRUTURA DE MADEIRA, 2004, Cuiab?. Anais... Cuiab?: UFMT, 2004. MILITZ, R. Heat treatment technologies in Europe: scientific background and technological state-of-art. In: CONFERENCE ON ENHANCING THE DURABILITY OF LUMBER AND ENGINEERED WOOD PRODUCTS, 2002, Kissimmee, Orlando. Proceedings? Madison: Forest Products Society, Madison, US, 2002. 19 p. MIRZAEI, G.; MOHEBBY, B.; TASOOJI, M. The effect of hydrothermal treatment on bond shear strength of beech wood. European Journal of Wood and Wood Products, (Online), 2012. doi: 10.1007/s001007-012-0608-9. NASCIMENTO, A. M.; LELIS, R. C. C.; COSTA, D. L.; OLIVEIRA, C. S. Comportamento de liga??es adesivas em madeira de reflorestamento. Floresta Ambiente, Serop?dica, v. 9, n. 1, p. 54-62, 2002. OLIVEIRA, R. M. Utiliza??o de t?cnicas de caracteriza??o de superficies em madeiras tratadas termicamente. 2009. 127 f. Tese (Doutorado em Ci?ncias) ? Universidade de S?o Paulo, S?o Carlos, 2009. OYARCE, C. D. B. Modification of wood color via electroheating technology. 2006. 56 f. Disserta??o (Master of Science) ? University of Idaho, Idaho. PALERMO, G. P. M. Propriedades e comportamento tecnol?gico da madeira de Eucalyptus grandis Hill ex. Maiden visando a sua utiliza??o em produtos de maior valor agregado. 2010. 237 p. Tese (Doutorado em Ci?ncias Ambientais e Florestais) ? Universidade Federal Rural do Rio de Janeiro, Serop?dica, RJ, 2010. BEKHTA, P.; NIEMZ, P. Effect of high-temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung, v. 57, p. 539-546, 2003. PINCELLI, A. L. P. S. M.; BRITO, J. O.; CORRENTE, J. E. Avalia??o da termorretifica??o sobre a colagem na madeira de Eucalyptus saligna e Pinus caribaea var. hondurensis. Scientia Forestalis, n. 61, p. 122-132, 2002. PIZZI, A. Natural phenolic adhesive I: Tannin. In: Handbook of adhesive technology. New York: Marcel Dekker, p. 347-358, 1994. 54 PRADO, J. N. Pa?s avan?a em plantios de con?feras e ex?ticas. Revista da Madeira, n. 110, 2008. PONCS?K, S.; KOCAEFE, D.; BOUAZARA, M.; PICHETTE, A. Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera). Wood Science and Technology, v. 40, n. 8, p. 647-663, 2006. PONCS?K, S.; SHI, S. Q.; KOCAEFE, D.; MILLER, G. Effect of thermal treatment of wood lumbers on their adhesive bond strength and durability. Journal of Adhesion Science and Technology, v. 21, n. 8, p. 745-754, 2007. QUIQUI, M. E.; MARTINS, S. S.; SHIMIZU, Y. J. Avalia??o de esp?cies e proced?ncias de Eucalyptus para o Noroeste do Estado do Paran?. Acta Scientiarum, Maring?, v. 23, n. 5, p. 1173-1177, 2001. RAPP, A. O. Review on heat treatments of wood. In: SPECIAL SEMINAR: ENVIRONMENTAL OPTIMIZATION OF WOOD PROTECTION, 2001. Antibes, France. Proceedings? Antibes, France: COST ACTION E 22, 2001, 68 p. RAPP, A. O.; SAILER, M. Oil heat treatment of wood in Germany ? state of the art. In: RAPP, A. O. Review on heat treatments of wood. In: SPECIAL SEMINAR: ENVIRONMENTAL OPTIMIZATION OF WOOD PROTECTION, 2001. Antibes, France. Proceedings? Antibes, France: COST ACTION E 22, 2001, 68 p. REPELLIN, V.; GUYONNET, R. Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition. Holzforschung, Berlin, v. 59, p. 28-34, 2005. RILLING, E. A. G. Madeira modificada com calor - TMT (Thermally Modified Timber). TWBrazil, 2009, 7 p. RODRIGUES, R. Floresta plantada. Folha de S?o Paulo, 20/06/2009. Dispon?vel em www.sbs.org.br/destaques_florestaplantada.html. Acessado em 23/05/2012. RUSCHE, H. Thermal degradation of wood at temperatures up to 200oC ? Part I: Strength properties of dried wood after heat treatment. Holz als Roh-und Werkstoff, v. 31, p. 273- 281, 1973. SALIM, R.; ASHAARI, Z.; SAMSI, H. W.; WAHAB, R.; ALMJURI, R. H. Effect of oil heat treatment on physical properties of semantan bamboo (Gigantochloa scortechinii Gamble). Modern Applied Science, v. 4, n. 2, p. 107-113, 2010. SANDERMANN, W.; AUGUSTIN, H. Chemical investigation on the thermal decomposition of wood ? Part III: Chemical investigation on the course of decomposition. Holz als Roh-und Werkstoff, v. 22, n. 10, p. 377-386, 1964. SCHULTZ, J.; NARDIN, M. Theories and mechanisms of adhesion In: PIZZI, A. Natural phenolic adhesive I: Tannin. In: Handbook of adhesive technology. New York: Marcel Dekker, p. 347-358, 1994. 55 SERNEK, M.; BOONSTRA, M.; PIZZI, A.; DESPRES, A.; G?RARDIN, P. Bonding performance of heat treated wood with structural adhesives. Holz als Roh-und Werkstoff, v. 66, 173-180, 2008. SEHLSTEDT-PERSSON, M. Improvement and innovation in wood drying: a major issue for a renewable material. In: 8th INTERNATIONAL IUFRO WOOD DRYING CONFERENCE. Proceedings... Brasov, p. 459-464, 2003. SHIMIZU, Y. J.; CARVALHO, R. E. P. Primeira aproxima??o na indica??o de eucaliptos para a produ??o de madeira na regi?o de Quara?, RS. Boletim de Pesquisa Florestal, Colombo, n. 40, p. 101-110, 2000. STAMM A. J.; BURR, H. K.; KLINE, A. A. Heat stabilized wood (staybwood). Rep. Nr. R. 1621. Madison: Forest Products Laboratory, 1946. STAMM, A. J.; HANSEN, L. A. Minimizing wood shrinkage and swelling - Effect of heating in various gases. Madison, Wisconsin: Industrial & Engineering Chemistry, 1937, 5 p. SUNDQVIST, B.; MOR?N, T. The influence of wood polymers and extractives on wood colour induced by hydrothermal treatment. Holz als Roh-und Werkstoff, v. 60, n. 5, p. 375- 376, 2002. TEODORO, A. S.; LELIS, R. C. C. Colagem de Madeira s?lida com adesivo natural ? base de tanino. Revista Universidade Rural, v. 25, n. 1, p. 55-59, 2005. THEANDER, O.; BJURMAN, J.; BOUTELJE, J. B. Increase in the content of low-molecular carbohydrates at lumber surfaces during grying and correlations with nitrogen content, yellowing and mould growth. Wood Science and Technology, v. 27, n. 5, p. 381-389, 1993. TIENNE, D. L. C.; NASCIMENTO, A. M.; GARCIA, R. A.; SILVA D. B. Qualidade de ades?o das juntas de madeira de Pinus coladas em condi??es simuladas de servi?o externo e interno Floresta Ambiente, Serop?dica, v. 18, n. 1, p. 16 -29, 2011. TJEERDSMA, B. F.; BOONSTRA, M.; MILITZ, H. Thermal modification of non-durable wood species II. IRG/WP 98-40124, 1998, 10 p. TJEERDSMA, B. F.; MILITZ, H. Chemical changes in hydrothernal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz als Roh-und Werkstoff, v. 63, n. 2, p. 102 -111, 2005. UNSAL, O.; AYRILMIS, N. Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood. Journal of Wood Science, v. 51, p. 405-409, 2005. UNSAL, O.; KORKUT, S.; ATIK, C. The effect of heat treatment on some properties and colour in Eucalyptus (Eucalyptus camandulensis Dehn.) wood. Maderas. Ciencia y tecnolog?a, v. 5, n. 2, p. 145-152, 2003. 56 VARGA, D.; VAN DER ZEE, M. Influence of steaming on selected wood properties of four hardwood species. Holz als Roh-und Werkstoff, v. 66, p. 11-18, 2008. VICK, C. B. Adhesive Bonding of Wood Materials. In: FOREST PRODUCTS SOCIETY. Wood handbook: wood as an engineering material. Madison, WI: USDA Forest Service, Forest Products Laboratory, 1999. General Technical Report FPL; GTR-113: Pages 9.1-9.24. VIITANIEMI, P.; J?MS?, S. Modification of Wood with Heat Treatment. VTT Research Report Publications 814, Espoo, Finland, 1994. In: NUOPPONEN, M.; VUORINEN, T.; J?MS?, S.; VIITANIEMI, P. The Effects of a Heat Treatment on the Behaviour of Extractibles in Softwood Studied by FTIR Spectroscopic Methods. Wood Science and Technology, v. 37, p. 109-115, 2003. VRAZEL, M. E. The effects of species, adhesive type, and cure temperature on the strength and durability of a structural finger joint. 2002. 71 p. Disserta??o (Master of Science in Forest Products) ? Mississippi State University, Mississippi, 2002. WEILAND, J. J.; GUYONNET, R. Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Roh-und Werkstoff, v. 61, p. 216-220, 2003. YILDIZ, S.; GEZER, E. D.; YILDIZ, U. C. Mechanical and chemical behavior of spruce wood modified by heat. Building and Enviroment, v. 41. p. 1762-1766, 2006. |
Page generated in 0.0102 seconds