Return to search

Scaling Effects on Damage Development, Strength, and Stress-Rupture Life on Laminated Composites in Tension

The damage development and strength of ply-level scaled carbon/epoxy composite laminates having stacking sequence of [+Tn/-Tn/902n]s where constraint ply angle, T, was 0, 15, 30, 45, 60, and 75 degrees, and size was scaled as n=1,2,3, and 4, is reported in Part I. X-radiography was used to monitor damage developments. First-ply failure stress, and tensile strength were recorded. First-ply failure of the midplane 90 deg. plies depended on the stiffness of constraint plies, and size. All 24 cases were predicted using Zhang's shear-lag model and data generated from cross-ply tests. Laminate strength was controlled by the initiation of a triangular-shaped local delamination of the surface angle plies. This delamination was predicted using O'Brien's strain energy release rate model for delamination of surface angle plies. For each ply angle, the smallest laminate was used to predict delamination (and strength) of the other sizes.

The in-situ tensile strength of the 0 deg. plies within different cross-ply, and quasi-isotropic laminates of varying size and stacking sequence is reported in Part II. No size effect was observed in the strength of 0 deg. plies for those lay-ups having failure confined to the gauge section. Laminates exhibiting a size-strength relationship, had grip region failures for the larger sizes. A statistically significant set of 3-point bend tests of unidirectional beams were used to provide parameters for a Weibull model, to re-examine relationship between ultimate strength of 0 deg. plies and specimen volume. The maximum stress in the 0 deg. plies in bending, and the tensile strength of the 0 deg. plies (from valid tests only) was the same. Weibull theory predicted loss of strength which was not observed in the experiments. An effort to model the durability and life of quasi-isotropic E-glass/913 epoxy composite laminates under steady load and in an acidic environment is reported in Part III. Stress-rupture tests of unidirectional coupons immersed in a weak hydrochloric acid solution was conducted to determine their stress-life response. Creep tests were conducted on unidirectional coupons parallel and transverse to the fibers, and on ±45°. layups to characterize the lamina stress- and time-dependent compliances. These data were used in a composite stress-rupture life model, based on the critical element modeling philosophy of Reifsnider, to predict the life of two ply-level thickness-scaled quasi-isotropic laminates. / Ph. D.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/30510
Date04 April 1997
CreatorsLavoie, J. André
ContributorsEngineering Science and Mechanics, Morton, John, Cramer, Mark S., Jackson, Karen E., Reifsnider, Kenneth L., Morris, Don H., Curtin, William A. Jr.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeDissertation, Text
Formatx, 145 leaves, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationOCLC# 38726086, etd-part1.pdf, etd-part2.pdf, etd-part3.pdf, etd_full.pdf

Page generated in 0.0028 seconds