This master thesis is about to investigate what opportunities we have with a impedance varying probe on different material under test. This report begins with a theory part with the focus on; electromagnetic principles, material characterizations and the principle behind the measurement setup. The methods is describing the sensor probes affection on the specimen, the induced currents location and the method for crack detection and lift-off measurements. The result chapter shows the measured impedance created by our setup, as well as the potential and the weak points of the system. In the conclusion and discussion chapter we will go through what modifications can be done to increase the quality of the measurements.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-39619 |
| Date | January 2020 |
| Creators | Kandili, Kawan |
| Publisher | Mittuniversitetet, Institutionen för elektronikkonstruktion |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0017 seconds