Sn-Pb solder has long been used in the Electronics industry. But, due to its toxic nature and environmental effects, certain restrictions are made on its use and therefore many researchers are looking to replace it. Sn-3.0Ag-0.5Cu (SAC) solders are suggested as lead-free replacements but their coarse microstructure and formation of hard and brittle Inter-Metallic Compounds (IMCs) like Ag₃Sn and Cu₆Sn₅ have limited their use in high temperature applications. In this research work, RE elements, mostly lanthanum (La), are used as potential additives to SAC alloys. They reduce the surface free energy, refine the grain size and improve the mechanical and wetting properties of SAC alloys. An extensive experimental work has been performed on the microstructure evolution, bulk mechanical properties, individual phase (matrix and IMCs) mechanical properties, creep behavior and wettability performance of the SAC and SAC-La alloys, with different (La) doping. SEM and EDS have been used to follow the continuous growth of the IMCs at 150°C and 200°C and thus provide a quantitative measure in terms of their size, spacing and volume fraction. Grain size is measured at regular intervals starting from 10 hours up to 200 hours of thermal aging using Optical Microscope with cross polarized light. Bulk mechanical properties are evaluated using tensile tests at low strain rates. Individual phase mechanical properties like Young's modulus, hardness, strain rate sensitivity index and bulge effects are characterized with nanoindentation from 100 µN up to 5000 µN loadings at different temperatures of 25°C, 45°C, 65°C and 85°C. Creep experiments are performed at elevated temperatures with good fitting of Dorn creep and back-stress creep models. Activation energy measurements are made at 40°C, 80°C and 120°C. Wettability testing on copper substrates is used for surface tension, wetting force and contact angle measurements of SAC and SAC-La doped alloys at 250°C and 260°C.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/44762 |
| Date | 22 May 2012 |
| Creators | Sadiq, Muhammad |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Dissertation |
Page generated in 0.0027 seconds