M.Sc. / The removal of organic pollutants from industrial and municipal water is a great challenge to water providers worldwide. Some of these pollutants are very toxic and pose serious health risks to both humans and animals. Additionally, the presence of organic pollutants in the water often leads to the corrosion of turbines used for power generation at power stations. This obviously makes the power generation process less efficient and thus has cost implications, especially for the end user. Besides the corrosion of turbines, organic water pollutants impact on the cost of generating clean water. To this end, municipalities and industries sourcing water from Rand Water’s treatment plants and Eskom’s power stations (coal-fired power station) may be plagued by high water costs. Geosmin and 2-MIB are detectable by the human nose at concentration levels as low as 10 ng/L. These common water pollutants and are renowned for causing bad taste and odour in drinking water. Although geosmin and 2-MIB do not pose any serious health risks to humans, they impact on the aesthetic and consumer acceptability of drinking water. Currently available technologies such as activated carbon are unable to remove these pollutants to low levels (i.e. ppb levels). In our laboratories, we have found cyclodextrin-based polyurethanes to be effective in the removal of a range of organic pollutants from water to the desired ppb levels. However, these investigations were confined to water samples deliberately spiked with specific pollutants and have not been proven with "real" water samples. We sought to integrate data accumulated in the laboratory by testing and applying these polymers on a larger scale and on real systems. Cyclodextrin (CD) polymers were employed in the removal of 2-MIB, geosmin and other organic pollutants from water. The water was sampled from a coal-fired power station and Zuikerbosch Water Treatment Plant (Rand Water). After using Solid Phase Microextraction (SPME) for the extraction of organic pollutants from the water samples the organic pollutants were identified and quantified using Gas chromatography-mass spectrometry (GC-MS). The new cyclodextrin polymer technology was compared with treatment methods currently applied at both the power station and treatment plant. To determine the environmental friendliness of this technology, polymer degradation studies were also carried out. These entailed performing soil burial tests prior to the characterization of the polymers. Thermogravimetric analysis (TGA), Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscopy (SEM) and Braunner Emmet Tellet (BET) analysis were used for the characterization of the polymers. The techniques were also used to determine if any degradation modifications occurred on the polymeric material. The findings of the study are summarized below: • SPME extraction and GC-MS analyses of geosmin, 2-MIB and other pollutants were successfully accomplished. • The cyclodextrin polymers were effective in the removal of geosmin and 2-MIB (up to 90%) from water sampled at Zuikerbosch water treatment plant. The polymers remained effective (90%) in the absorption of geosmin and 2-MIB even when the water samples were spiked with a competing pollutant (i.e. humic acid). Activated carbon has been noted to have reduced adsorption capacity when humic acid is present in water. • The polymers demonstrated the ability to remove as much as 90% of organic pollutants from raw water compared to the 50% removed by the polyelectrolyte and optimum minimal polyaluminium chloride employed at the coal-fired power station. Analyses of the samples using TOC before and after treatment were accomplished. Reduction in the TOC was noted at the different sampling points after Eskom’s water treatment regime. • Results from the study indicated that the β-CD TDI polymers underwent a greater weight-loss during soil burial when first digested in sulphuric acid (ca. 50% maximum mass loss). On the other hand, β-CD HMDI polymers appeared to be unaffected by predigestion and experienced the same amount mass loss for the digested and undigested polymers (ca. 30% maximum mass loss). SEM studies revealed changes in the surface morphology of the polymers. Moreover, thermogravimetric analysis (TGA) gave an indication of polymer degradation under all soil burial conditions the polymer was subjected to.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:8318 |
| Date | 30 April 2009 |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds