Return to search

Analytical and experimental investigations of dam-break flows in triangular channels with wet-bed conditions

Yes / Based on the method of characteristics, an analytical solution for the one-dimensional shallow-water equations is developed to simulate the instantaneous dam-break flows propagating down a triangular wet bed channel in this study. The internal relationships between the hydraulic properties associated with the dam-break flow are investigated through the comparisons with the well-known analytical solutions for rectangular channels. Meanwhile, laboratory experiments are conducted in a prismatic, horizontal and smooth flume with a triangular cross-section. The non-intrusive digital image processing is applied for obtaining water surface profiles and stage hydrographs. Results show that the dam-break flow propagation depends on the dimensionless parameter defined as the ratio of initial tailwater depth over reservoir head. has significant effect on the dam-break wave in the downstream flooded area. For , the water surface profiles in the reservoir for different at a given time remains similar. For ≥ 0.5, extra negative waves occur in the reservoir, leading to the water surface undulations. Undular bores are generated at the dam site and propagate downstream. Time evolution of dam-break flows under three different reservoir heads is similar for the same . The inception of water surface profile change is earlier when the reservoir head is larger. The analytical model shows satisfactory agreement with the experimental results though some errors exist between the analytical solution and measurements due to the formation of extra negative waves, jet and undular bores. The similarities and discrepancies between the hydraulics in the triangular and rectangular channels are identified analytically in terms of the profiles of water depth, velocity, discharge, bore height and wave-front celerity with . The presented solution could be applied to predict the effect of wet bed condition on the dam-break wave in triangular channels, while laboratory measurement data could be used for validating analytical and numerical models. / National Natural Science Foundation of China (Grant No: 51879179), Sichuan Science and Technology Program (No. 2019JDTD0007) and Open Fund from the State Key Laboratory of Hydraulics and Mountain River Engineering, Sichuan University (SKHL1809)

Identiferoai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/17840
Date28 July 2020
CreatorsWang, B., Liu, X., Zhang, J., Guo, Yakun, Chen, Y., Peng, Y., Liu, W., Yang, S., Zhang, F.
Source SetsBradford Scholars
LanguageEnglish
Detected LanguageEnglish
TypeArticle, Accepted manuscript
Rights(c) 2020 ASCE. Full-text reproduced in accordance with the publisher's self-archiving policy. This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://doi.org/10.1061/(ASCE)HY.1943-7900.0001808., Unspecified

Page generated in 0.0019 seconds