Return to search

Effect of CdCl&esc;b2&esc;s treatment on CdTe and CdS solar cell characteristics after exposure to light for 1000 hours [electronic resource] / by Ashok Rangaswamy.

Title from PDF of title page. / Document formatted into pages; contains 71 pages. / Thesis (M.S.E.E.)--University of South Florida, 2003. / Includes bibliographical references. / Text (Electronic thesis) in PDF format. / ABSTRACT: The CdTe solar cell is a leading candidate for cost-effective thin-film solar cells having demonstrated small area cell effciencies of 16.4%. A Key issue associated with CdTe thin film photovoltaic modules is the analysis of degradation behavior of the device. The analysis is complicated as changes due to degradation may be reversible. Solar cell measurement techniques were used to understand the changes in device parameters after light soaking for 1000 hours. An automated measurement setup was implemented as part of this thesis work. The main objective of this thesis was to study the effect of CdCl&esc;b2&esc;s heat treatment on the device stability. The temperature for this heat treatment was varied from 360oC to 400oC. Cells were stressed under illumination at both short circuit and open circuit conditions. It was found that the increase CdCl&esc;b2&esc;s heat treatment temperature slowed down the degradation rate.This was true for both short and open circuit stress conditions. Also short circuit stress condition slowed down the degradation of the device when compared with the open circuit condition. It became evident that the recombination current mainly got affected when the device was said to be degraded. / System requirements: World Wide Web browser and PDF reader. / Mode of access: World Wide Web.

Identiferoai:union.ndltd.org:USF/oai:palmm.fcla.edu:AJJ4778SEB
Date January 2003
CreatorsRangaswamy, Ashok.
PublisherUniversity of South Florida
Source SetsUniversity of South Flordia
Detected LanguageEnglish

Page generated in 0.0015 seconds