Information and communications technology (ICT) is an important part in today’s society and around 60% of the world's population are connected to the internet. Processing and storing ICT data corresponds to approximately 1% of the global electricity demand. Locations that store ICT data produce a lot of heat that needs to be cooled, and the cooling systems stand for up to 40% of the total energy used in ICT-centre locations. Investigating the efficiency of the cooling in ICT-centres is important to make the whole ICT-centre more energy efficient, and possibly saving operational costs. Unwanted operational behaviour in the cooling system can be analysed by using unsupervised machine learning and clustering of data. The purpose of this thesis is to characterise cooling patterns, using K-means clustering, in two water-cooled ICT rooms. The rooms are located at Ericsson’s facilities in Linköping Sweden. This will be fulfilled answering the research questions: RQ1. What is the cooling power per m2 delivered by the cooling equipment in the two different ICT rooms at Ericsson? RQ2. What operational patterns can be found using a suitable clustering algorithm to process and compare data for LCP at two ICT-rooms? RQ3. Based on information from RQ1 and patterns from RQ2 what undesired operational behaviours can be identified for the cooling system? The K-means clustering is applied to time series data collected during the year of 2022 which include temperatures of water and air; electric power and cooling power; as well as waterflow in the system. The two rooms use Liquid Cooling Packages (LCP)s, also known as in-row cooling units, and room 1 (R1) also include computer room air handlers (CRAHs). K-means clusters each observation into a group that share characteristics and represent different operating scenarios. The elbow-method is used to determine the number of clusters, it created four clusters for R1 and three clusters for room 2 (R2). Results show that the operational patterns differ between R1 and R2. The cooling power produced per m2 is 1.36 kW/m2 for R1 and 2.14 kW/m2 for R2. Cooling power per m3 is 0.39 kW/m3 for R1 and 0.61 kW/m3 for R2. Undesirable operational behaviours were identified through clustering and visual representation of the data. Some LCPs operate very differently even when sharing the same hot aisle. There are disturbances such as air flow and setpoints that create these differences, which results in that some LCPs operate with high cooling power and others that operate with low cooling power. The cluster with the highest cooling power is cluster 4 and 3 for R1 and R2 respectively. Cluster 2 has the lowest cooling power in R1 and R2. For LCPs operating in cluster 2 where waterflow mostly at 0 l/min and therefore where not contributing to the cooling of the rooms. Lastly, the supplied electrical power and produced cooling power match in R1 but do not in R2. Implying that heat leave the rooms by other means than via the cooling system or faulty measurements. There is a possibility to investigate this further. Water in R1 and R2 is found to, at occasions, exit the room with temperature below the ambient room temperature. It is also concluded that the method functions to identify unwanted operational behaviours, knowledge that can be used to improve ICT operations. To summarize, undesired operational behaviours can be identified using the unsupervised machine learning technique K-means clustering.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-195937 |
| Date | January 2023 |
| Creators | Wallin, Oliver, Jigsved, Johan |
| Publisher | Linköpings universitet, Energisystem |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0029 seconds