‘It is always dark ahead of the pick!’ This centuries-old miners’ expression still reveals the uncertainty about the upcoming rock properties during exploration and extraction processes. It is still tough to predict what a drill rig or a cutting machine will experience during operation. However, in terms of safety, energy consumption and the performance of the whole machine it would be beneficial to be able to monitor such an extraction process. Hence, different sensors or sensor combinations are tested during cutting and drilling processes within RealTime Mining project. First aim is to depict the machine performance of the machine at any time. In a second step sensor information is also used to conclude on mechanical rock properties during the process.
Measuring the machine performance for cutting and drilling is quite similar and has been condensed under the terms Monitoring-While-Cutting (MWC) respectively Monitoring-While-Drilling (MWD). Both monitoring systems contain a bundle of sensors to depict the whole process. As an example, the energy demand of such a machine can be determined by measuring the power consumption of the engines constantly. Furthermore, the process parameters like advance rates and drilling or cutting speed have to be evaluated as well to be able to depict the whole extraction machine.
To conclude on mechanical rock properties several other sensor solutions have been tested and finally integrated into those monitoring systems. One of the most important rock properties for drilling and cutting is the rock strength. Increasing rock strength during an extraction process leads to increasing forces that are needed to break a certain amount of rock. Hence, e.g. measuring the torque of a drill string or the cutting forces can be an indicator on rock resistance or rock strength. Not minor important, is the characteristic rock breakage behavior which can be classified by the use of ‘acoustic’ sensors. Dependent on the rock properties that currently is drilled or cut through a characteristic fracture occurs in front of the tool. This results in audible and also inaudible characteristic acoustic waves that propagate through the machine body and can be gathered on the machine by piezo-electric sensors. The interpretation of these signals could lead to a material classification already during the extraction process.
Several tests of these sensor technologies have been conducted in laboratory environment as well in field tests. The most promising results are going to be presented.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:23182 |
| Date | January 2017 |
| Creators | Späth, Bastian, Philipp, Matthias, Bartnitzki, Thomas |
| Publisher | TU Bergakademie Freiberg |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | urn:nbn:de:bsz:105-qucosa-231062, qucosa:23171 |
Page generated in 0.0018 seconds