Yes / Based on the particle-in-cell computing method, a debris mass model has been established to simulate debris flow fan formation over large downstream
areas. Under the assumption that the debris medium is an assembly of many small, identical debris particle masses, the overall flowbehavior is obtained
by averaging the flow parameters of neighboring debris masses at fixed grid points. The equation of motion for each debris mass is based on the depthaveraged
Navier-Stokes equation in two horizontal dimensions. The friction slope of debris flow is modeled by combining the effects of both the liquid
phase (slurry composed ofwater and fine particles) modeled as a Bingham fluid and solid phase (coarse particles) in the debris mixture. The rheological
parameters are evaluated according to the density and particle size distribution of the debris material. Convergence of the method is demonstrated by
repeatedly doubling the number of debris masses employed in the computation until insignificant change is observed. The debris mass model is
demonstrated through a prototype application to a documented 1991 debris flowdeposited in the lower reach of the Shawan Ravine inYunnan Province,
China. The final alluvial fan was formed by eight consecutive debris flow events, each lasting about 2000 seconds with a discharge rate of 250 m3/s.
The simulation results are in good agreement with field observations. The general features of debris fan development and configuration are well
predicted.
Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/470 |
Date | January 2002 |
Creators | Shao, Songdong |
Source Sets | Bradford Scholars |
Language | English |
Detected Language | English |
Type | Article, Published version |
Rights | © 2002 International Association of Hydraulic Engineering and Research. Reproduced in accordance with the publisher's self-archiving policy., Unspecified |
Page generated in 0.0017 seconds