The main purpose of this thesis was to develop a printed circuit board for Autoliv Electronics AB. This circuit board should be placed in their test equipment to support some of their camera vision systems used in cars. The main task was to combine the existing hardware into one module. To be able to achieve this, the most important factors in designing a printed circuit board was considered. A satisfying power distribution network is the most crucial one. This was accomplished by using decoupling capacitors to achieve low enough impedance for all circuits. Calculations and simulations were executed for all integrated circuits to find the correct size and numbers of capacitors. The impedance of the circuit board was tested with a network analyzer to confirm that the impedance were low enough, which was the case. System functionality was never tested completely, due to delivery problems with some external equipment.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-121806 |
| Date | January 2015 |
| Creators | Johansson, Jimmy, Odén, Martin |
| Publisher | Linköpings universitet, Elektroniska Kretsar och System, Linköpings universitet, Tekniska fakulteten, Linköpings universitet, Elektroniska Kretsar och System, Linköpings universitet, Tekniska fakulteten |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.003 seconds