The master’s thesis presents a design for the technology of manufacture of a chandelier hinge from the material ČSN 42 3005 (Cu99.5) with a sheet thickness of 0.5 mm. Due to the spherical shape of the part and the series 40 000 parts per year, the technology of deep drawing was chosen for two drawing operations, while the redrawing is performed by reverse deep drawing. Due to the nature of the component, the additional technology is shearing. The manufacturability of the part was verified using numerical simulation in the PAM-STAMP software. The forming process is performed using three forming tools on three different presses. For the first, combined tool, an LE 160C eccentric press is used. A hydraulic press ZHO100 is applied in the second tool for the reverse drawing, and finally, an eccentric press LEK160 is applied for the shearing in the third operation. With the selected profit value of 25 %, the final price for the component was set at CZK 104.17. The turning point occurs after reaching 16 248 parts.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:445167 |
| Date | January 2021 |
| Creators | Mergeščíková, Lenka |
| Contributors | Jopek, Miroslav, Žák, Ladislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds