A series of wind tunnel tests were conducted to determine the aerodynamic forces and moments produced by several clamped oblique wings. The wing sweep and aileron deflection angles were varied throughout a wide range of dynamic pressures. The wing structure was also stiffened. Strains were measured in the swept forward wing panels.
Results from these tests showed that increasing the wing structural stiffness or applying aileron deflection would increase the wing divergence speed. The divergence speed decreased as the sweep angle increased. Further tests were conducted with the wing unconstrained in roll. Results showed that an oblique wing will attempt to unload its sweptforward panel by assuming a banked position. The wings were found to flutter before unclamped divergence occurred. Finally, it was found that the wing loading of an oblique wing can remain constant for a given aileron deflection throughout a wide range of velocities including velocities above the clamped divergence speed. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/42938 |
Date | 08 June 2010 |
Creators | Papadales, Basil S. |
Contributors | Aerospace and Ocean Engineering, Weisshaar, Terence A., Cliff, Eugene M., Schetz, Joseph A. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Thesis, Text |
Format | 98 leaves, BTD, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | OCLC# 08275086, LD5655.V855_1975.P36.pdf |
Page generated in 0.0071 seconds