The thesis aimed to study the impact of manufacturing and assembly technology, the valve bolt fitted to diesel high pressure pump CP3 in the Bosch, which has been found to leak. As experimental material was chosen heat treated bolts M16x1,5 made of material 12 050th. Groups of samples were produced in two ranges hardness. Experimental determination of the optimum range of hardness was assessed on the basis of the results of the process of the screw and set the value of plastic deformation of the sealing surfaces of the parts. Experimental section also deals with the analysis of bearing surfaces on the pump and the components, after the screw process. To some extent, is observed as surface treatment
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229205 |
| Date | January 2010 |
| Creators | Hrouzková, Andrea |
| Contributors | Zapletal, Josef, Doležal, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0118 seconds